Instruction Manual

3.6 Reset the wifi of the machine, long press the wifi reset key on the machine, loose when hearing
the voice "Network Matching", the blue light of the wifi quckly flashes; then click
on the APP interface, and then click next;
3.7 While waiting for wifi connection, once wifi connection is successful, click the sweeper icon
and enter the main interface of APP to operate.
"Indicator light Flashing"
4. Remote Control Status (Optional)
11 Instruction Manual for Robot Sweeper
1.Press the Suction Adjustment Key of “ ” to adjust the suction of the machine fan.
2.Press the Edgewise Sweep Key of “ ” to enter the edge cleaning mode.
3Press the Fixed Point Cleaning Key of “ ” to start the area cleaning in spiral way
with the current point as the center.
4.Press the Full Charged Cleaning Key of “ ”, when the machine is on the charging
base, press this key to enter the full charged cleaning mode. When the machine is fully
charged, it will automatically exit from the charging base and start to clean automatically.
When the battery is low again, it will automatically return to the charging base. After
fully charged, it will go out to clean again, when the second cleaning is completed, it
will automatically exit from this mode. If the machine leaves the charging base midway,
it will exit from the full charged cleaning mode.
5.Press the " " key to find the machine. Press this key and the machine will announce
"I' m here" to remind the user.
Turn On/Off Key
Advance Key
Left Direction Key
Suction Adjustment
Fixed Point Cleaning Key
Full Charged Cleaning Key
Auto Recharge Key
Auto Cleaning/Pause Key
Right Direction Key
Back Up Key
Edgewise Sweep Key
Serch for the Machine