User's Manual
St
atement
party responsible for
Any changes or modifications not expressly approved by the
interference
received, including
(2) this device mu
conditions:
Alarm On/Off:
Before Use:
Main Unit: This clock adapts the RF transmission vibration
function on the basis of the normal clock. Under the
vibration gear or vibration with BBB sound gear, the
vibration signal can be transmitted by the clock and
received by the vibrator.
Vibrator: When the vibrator receives the signal sent by the
main unit, it will automatically turn on the clock vibration
reminder. With a 3.7V built-in lithium battery, the vibrator
can supply power independently. And the battery can last
3 months without external power supply.
Power On:
But
ton Interface:
Way 1: Open the back cover of the battery, install 3 AAA-
batteries, the screen will display for 1 second with a
sound of 'DI' and turn on.
Way 2: Connect the micro USB cord to the clock and an
adapter under DC 5V current, and the screen will display
for 1 second with a sound of 'DI' and turn on.
6. Brightness/
Snooze Button
7. Projection Button
Celsius/F
ahrenheit Switch:
Pr
ess the [ ] button to switch between °C and °F.
Note: below 0 degrees display "LO", above 50 degrees
display "HI"
F
actory Default Mode:
Def
ault Time Format: 24H
Default Alarm Time: 7:00
Default Time: 0:00
Default Alarm: Off
Default Ringtone: Off
Default Date: 2020.1.1
Tip
s:
1. T
wo power supply modes: 3 AAA batteries and Micro
USB powered.
2. Re-power on, the LCD screen will be fully displayed for
1 second and enter the normal time mode with a
sound of 'DI'.
3. In the setting state, if there is no operation for 20
seconds, it will automatically return to the normal time
mode.
4. Avoid exposure to strong sunlight.
6 7
1. Time Setting
2. Alarm Setting
3. Date Setting
4. Increment/
°C/°F
5. Decrement/
Weekend Mode
1
2
3
4
5
1
1. T
ouch the [ ] button to turn on projection.
2. Touch the [ ] button again to adjust the brightness,
from dark to bright (0%, 10%, 60%, 100%).
3. Long press the [ ] button for 180° flip projection
image.
Pr
ojection/Brightness/Angle Setting:
(with USB powered)
Pr
ojection Clock
(Vibrating Model)
User Manual
Date Setting:
1. Long press the [ ] button to enter the date setting,
and the year number starts to flash.
2. Press [ ]/[ ] for date setting, long press [ ]/[ ]
for quick setting.
3. Press the [ ] button again to confirm.
Tip 1: The default date is 2020.1.1, and the year number
will not be displayed.
Tip 2: After 20 seconds with no operation, it will
automatically confirm and exit the date setting.
1
Time Setting:
1. Long press the [ ] button to enter the time setting,
and the time number starts to flash.
2. Press [ ]/[ ] for time setting, long press [ ]/[ ]
for quick setting.
3. After setting, press the [ ] button again to confirm.
Tip: After 20 seconds with no operation, it will
automatically confirm and exit the time setting.
press
press
press
press
1
12H/24H Format:
Press the [ ] button to switch between 12H/24H.
Tip 1: Under 12H format, AM is displayed in the morning
and PM is displayed in the afternoon.
Tip 2: Under 24H format, AM/PM is not displayed.
1
Alarm/Volume Setting:
1. Long press the [ ] button to enter the alarm setting,
the number 7:00 at the bottom right corner starts to
flash.
2. Press [ ]/[ ] to set the alarm time, long press
[ ]/[ ] for quick setting.
3. After setting, press the [ ] button again to confirm
the alarm time, and “L01” flashes.
4. Press [ ]/[ ] to select “L01” low volume and
“L02” high volume.
5. Press the [ ] button to confirm and exit the alarm
setting.
1
Press the [ ] button to turn on/off the alarm. The
alarm is ON with the“ ”pattern displaying, while OFF
without the“ ”pattern.
1
Weekend Mode:
When the alarm function is on with the“ ”pattern,
press the [ ] button to turn on/off the weekend mode.
The weekend mode is ON with the “WEEKEND” pattern
displaying above the time, while OFF without the
“WEEKEND” pattern.
1
Tip 1: After 20 seconds with no operation, it will
automatically confirm.
Tip 2: The 12H/24H format will not influence the alarm
clock setting.
Tip 1: With AAA batteries, the projection brightness is
fixed at 60%, and turns off after 10 seconds.
Tip 2: With USB powered and no adjustment, the
projection brightness repeats this cycle 10%→
60%→100%→0%. Touch the [ ] button to
adjust the brightness and it will stay on.
Specific
ation:
433RF T
ransmission:
(multi-frame data transmission > 3 times)
1. Vibration/BBB plus Vibration: When the alarm clock
rings, the signal is transmitted, and the vibrator starts
to vibrate.
2. Distance: > 30m
T
urn Off Vibration:
1. Turned off by the clock
2. Switch the vibrator to "OFF"
Indic
ator Status:
1. L
ow Battery: red light flashes 1 time per second
2. Charging: red light stays on
3. Full Charge: green light stays on
4. Successful Connection: green light stays on for 5S, and
the motor vibrates
5. Lost Code Detection: green light stays on for 5S
S
top the Alarm:
When the alarm rings, touch any button except the
snooze button to stop the alarm that day.
1
Brightness Setting: (with USB powered)
1. T
ouch the [ ] button to adjust the screen
brightness, from dark to bright (0%, 10%, 60%, 100%).
Tip 1: With AAA batteries, the screen brightness keeps
default 60% for 5 seconds and then dims to 0%.
You can touch the [ ] button to wake up
the screen again.
Tip 2: With USB powered and no adjustment, the
screen brightness repeats this cycle 10%→60%
→100%→0%. Touch the [ ] button to
adjust the brightness and it will stay on.
1
blink blink
blink
blink
blink
blink
blink
Snoo
ze Setting:
When the alarm rings, touch the [ ] button to
pause ringing and snooze is ON with“ ”pattern
flashing. After snoozing time (9 minutes), the alarm
will ring again.
1
But
ton Interface:
Ins
tructions:
1. Please place this vibrator on the bedside table or at a
position that can be heard. Away from metal objects
and other wireless signal sources.
2. The vibrator includes a built-in battery, which can
supply power independently.
3. Signal Receiving: After receiving the signal from the
clock, the vibrator will vibrate at the same time.
4. Vibration Gear: OFF, Low, High, from weak to strong
5. Vibration: After receiving the data once, the excess
times data will not be processed
6. Vibration Time: With no operation from the clock, the
vibrator will automatically turn off after 5 minutes.
After Snooze time (9 minutes) and no operation from
the clock, the vibrator will automatically turn off after
2 minutes.
1. Toggle switch
HI: High
LO: Low
OFF: Off
1
P
ower
Supply
Mode
1.Battery: 3 AAA
batteries 4.5V
2.USB powered：
4.5V-5.0V
Weekend
Mode
ON with the
“WEEKEND”
pattern OFF
without the
“WEEKEND”
pattern
Working
Current
90mA (MAX)
Temperature
Error
±1℃
Projection
Color
Red
Temperature
Detection
Cycle
30 seconds
Net
Weight
215g
Specific
ation:
Working
V
oltage
5-5.5V
（micro)
Input
Current
500±50MA
（MAX）
Built-in
Battery
1000mAh/3.7V
lithium battery
Working
Current
Current
during
vibration:
410mA（MAX）
Color
Athens black
Quiescent
Current
5uA≤
Vibr
ation
Gear
OFF, Low, High
from weak to
strong
Battery
Life
Standby
time:
3 months
Working
time(one
vibration
per day):
15-18 days
Center
Frequency
433.9mHz
RF
Transmit/
Receive
Distance
> 30m
Siz
e 4*76*28mm Sensitivity -108dBm
Net Weight 85g
Quiesc
ent
Current
15mA (MAX)
Projection
Angle
90 degrees front
/ 30 degrees rear
Display LCD
Projection
Brightness
0%→10%→60%
→100%
Default 0%
Time
Error
±30
seconds/
month
Screen
Brightness
0%→10%→60%
→100%
Default 60%
Volume
Low: L01
high: L02
P
erpetual
Calendar
Range
2000.1.1-
2099.12.31
Color White
Size
146.7*29.4*
86.28mm
Battery
Life
About 3
months
T
emperature
Range
0℃—50℃
(32°F -122°F)
Alarm
Time
3 minutes
T
emperature
Resolution
0.1℃ Snooze
Time
9 minutes
T
his device complies with part 15 of the FCC Rules.
(1) This device may not cause harmful interference, and
that may cause undesired operation.
compliance could void the user's
authority to operate the equipment.
Thisequipmen
thasbeentestedandfoundtocomplywith
thelimitsforaClassBdigitaldevice,
pursuanttopart15ofthe
FCCRules.Theselimitsaredesignedtoprovide
reasonable
protectionagainstharmful
interferenceinaresidential
installation.Thisequipmentgenerates,usesandcan
radiate
radiofrequencyenergyand,
ifnotinstalledandused
in
accordance
withtheinstructions,ma y causeharmful
interferencetoradio
communications.However,thereisno
guaranteethatinterferencewillnotoccurinaparticular
installation.Ifthis
equipmentdoescauseharmfulinterference
toradioortelevisionreception,whichcanbedeterminedby
turning
theequipmentoffandon,theuserisencouraged
to
trytocorrecttheinterferencebyoneormoreofthefollowing
measures:
—Reorientorrelocatethereceivingantenna.
—Increase
the
sep
aration
be
tween
th
e
e
quipment
and
re
ceiver.
Operation is subject to the following two
st accept any interference
—Conne
cttheequipmentintoanoutletonacircuitdifferent
fromthattowhichthereceiverisconnected.
—Consultthedealeroranexperiencedradio/TVtechnician
forhelp.
FCCRa
diationExposure
Thisequipmen
tcomplieswithFCCradiationexposurelimits
setforthforanuncontrolledenvironment.
Thistransmittermustnotbeco‐locatedoroperatingin
conjunctionwithanyotherantennaortr ansmitter.