Instruction Manual

wifi printing camera
(instruction manual)
1
2
7
3
4
12
13
one. Key function description:
1. Photo/Video mode switch 2. Delete 3. Return/Main menu
4. Power on/off, main menu 5. Photo/video, confirm key
6. Turn up 7. Turn left/photograph 8. Turn right/album
9. Turn down 10. Print on/of f 11. Display 12. Microphone
13. Camera 14. Speaker 15. Paper compartment door
16. Lanyard 17. Memor y card slot 18. Charging port
Three. Operation illustrate
①.(4.Camera On/Off switch, Main menu): Long press this button
for 3 seconds to turn on and off the camera, and short press to
return to the main menu.
②.(1 . Photo /Video mode switch): Select this button to switch the
corresponding function and then press (5.Shutter button, Verify)
to operate.
③.(10.Print On/Off switch): To print the photo, please turn on this
print switch first
④.( 13.Lens of camera): It can be manually rotated to switch
between front and rear.
Photo paper ripped in zigzag direction
two. How to replace the printing paper:
Lift the two paper clips to open the cover of the paper
Turn the hat 180 degrees clockwise to
switch the front Camera (Note: The hat
only supports rotation 180Degree, please
avoid excessive force)
four. TF card installation and notes:
1. Insert the TF card into the card slot in the correct direction
until the TF card is fixed in the card slot. When removing the TF
card, press down the TF card gently and wait for the TF card to
pop out , then you can remove it。(TF card must use a C10 or
higher high-speed card. Please do not insert or remove the TF
card while the machine is working to avoid damage to the
machine and memory card)
2. Please pay attention to the direction of TF card insertion. If it
is inserted upside down, this may damage the machine, TF card
and card slot.
3.After you inserting the TF card into the machine, the machine
will set the TF card as the default storage device. The data in the
original TF card may not be readable. Please make a backup of
the data first.
4. If the TF card is not compatible with the machine, please use
the format option in the internal memory menu to format the TF
card or try another TF card.
Five. Operating parameters：
1. Operating voltage: 7.4V.
2. Operating current: 150mA.
3. Printing operating current: 2A.
4. Charging current: 2A.
5. Charging voltage: 5V.
Six. Charging instructions:
1. During charging, the indicator light is always on and indicator
light is off when fully charged.
2. When input over-voltage, output under-voltage and
over-voltage, output short-circuit or chip over-temperature, and
indication of battery connection, etc., the indicator flashes at a
frequency of 1.3HZ.
3. It takes 70-130 minutes to fully charge the battery.
Seven. Battery use and safety precautions
This machine uses a built-in 7.4V / 1200mAh polymer battery.
It cannot be removed or replaced. If it is damaged, please
contact the seller for repair. The battery must be recharged
under adult supervision. When the battery is charging, the toy
switch should be turned off. The power terminals must not be
shorted. Do not connect more than the recommended number
or higher than the recommended voltage (recommended
adapter specifications: DC5V﹍2000mA). During the use of the
toy, the wire plug housing and other parts should be regularly
inspected for damage. If damage is found, stop using it until it
is repaired. When the toy is not used for a long time, please
fully charge the battery before turning off the power switch.
Nine. Camera specification
Dimensions 130x104.2x48.8mm
Display 2.4 inch color screen
Batter y sp ec ification 7.4V/1200mAh lithium batte ry
Photo paper specification 57X27mm glossy
Number of pixels 24 0 (RGB)*320
Photo resolution 3280*1848, 4000*2248, 4032*2880
Video resolution 1 28 0* 720, 1920*1080
Music format MP3, WAV, WMA, FLAC, APE
Maximum suppor t 32G
Speaker 8Ω 1W
Function WIFI cam era vi de o pr in t
System language Chinese, traditional Chinese, English, etc.
Transmission interface MICRO 5PIN USB2.0
Suppor t system WINDOWS XP/7/8
Body weight 220g
Working temperature -5℃ to 40℃
WiFi operating instructions
Scan code to download APP
Scan the QR code on the
right with your mobile phone
Warranty Card
Poduct Model：_____________S/N:_____________________
Dealer： ______________ Purchase Date：______________
Dealer Seal：____________________________________
Note:
If replacing service, it must be indicated in the "replacement /
repair records"; The warranty card must be presented at the
same time as the official purchase invoice with the dealer seal,
this card is valid. Please be careful and fill in the details of the
warranty card. If any alterations are made, this card is invalid.
Replacement /
Repair Date
Replacement /
repair records
Replacement /
repair unit (seal)
Select the corresponding APP to download:
FR_PRINT
IOS.............................................iPhoneAPP
Android).........................Android phoneAPP
1. Click the menu button to turn onWIFI
2. Mobile phone selects the machine
WIFI name: FR_PR****
3. Enter the password "12345678" to
connect
1
2
3
Before using the product, please read the instruction manual carefully.
It contains important information, please keep it safe for use.
尺寸：90*68mm
Load thermal paper as shown
Load the sticker paper as shown
eight. Maintenance method:
The electrical components of this product mustn't be exposed
to water or placed in a humid environment. When cleaning,
wipe the surface stains with a dry cloth. Do not allow children
to play with disintegrated, broken, deformed toys to avoid
accidents such as accidental swallowing and suffocation.
caveat:
1. This product contains small parts, there is a danger of
suffocation, not suitable for children under 3 years old.
2. Do not immerse the batter y in water, pay attention to
moisture and explosion.
3. Do not get close to the fire source when playing.
4. Do not disassemble or modify the battery without
authorization.
5. This product needs to be used under direct adult supervision.
6. Toys are not allowed for children under 3 years of age
7. Toys can only use the recommended transformer.
8. Transformers are not toys.
9. There is important information on the package, which must
be retained.
For APP operation details, please check in APP Help Center
Insert the memory
card chip face up directly