User's Manual

Specification
Product:
Luminous Flux:
Input Voltage:
Lamp Base:
Rated Power:
Ra:
CCT
Size:
Working Hours:
Wireless Connect:
Support system
≧1150 lm
KD2/3
15 W
＞80
∅290*90mm
＞20000h
Android/IOS
1
Factory Reset
Turn on and off the lamp 5 times.Hold for 2 seconds when the lamp is turned
on or off.For the 5th time,hold the turn-on mode for about 5 seconds. If the
light blinks,which means the lamp is reset successfully.
Installation
1. Installing ceiling
Install the ceiling and turn on the power switch.
Use quick-connect terminal wiring.Turn the mask open,insert the pre-wired
terminals into the quick-connect terminals,then fix the ceiling lamp,a
peripheral switch,and finally install the top cover.that's it.
2
3
2. Click Add Device and select Smart Lighting---Lighting Devices.
11111111111
Living room master bedroom second bedroom restaurant
4
3. Switch the bulb quickly 3 times,and turn it on for the fourth time.The bulb
will flash.Now you can click on Confirm light blinks rapidly on the app.If
you can't connect,please try a few more times.Because it is possible that
the network is not good enough to connect to your lights.
5
5. Type in“Smart life”in the search and click the search button next to it.
7
6. Enable Smart Life Skill,the sign in your Smart Life account to complete
the account linking.
Search all skills
7. After successful account linking,ask Alexa to discover devices.After a 20-
second device discovery.Alexa will show all the discovered devices.
8 9
9. In Smart Home page,you can group your devices for different categories.
Your Smart Life APP has been skilled with Alexa.Now you can control your
Smart Light through Alexa.
8. Back to Menu by clicking “Home” ,and then click “Smart Home”.
How to connect Smart Device to Google Home
1. Click on the Google Home App and make sure Google Home is installed.If
not,please follow Google Home installation instruction to complete the
installation.
2. Once Google Home is installed,in the upper left corner of APP Home
page,clicking button to show APP menu,then clicking“Home Control”.
Home
Home Control
3. On“Add devices”page,scroll down to find“Smart Life”and then click
it.Sign in Smart Life App with your Smart Life App account and password
choose Smart Life App in the drop down menu to complete the account
linking.
Smar
t
Life
4. After successful account lining,you can see all the smart devices from
your Smart Life App account in Google Home App.You can assign rooms for
each device.
5. Now you can use Google Home to control your smart device,you can say
like:
OK Google,turn on/off wall light
OK Google,set bedroom light to red
Assign rooms
wall light
GOT IT
10
Product Features
Color
Adjustment
Brightness
Adjustment
One-key
Open ration
Scene Mode
Switch
Timing
Switch
Voice
Control
Phone
Control
Firmware
Upgrade
11
Safety Precautions
1. Please confirm the working voltage before using this product,the use
of inappropriate voltage may cause damage to the product and security
risks.
2. Please don't dismantle the product by yourself.
3. The ceiling will generate heat when working.Please don't use it in a
sealed lamp for a long time.Keep the air flow around.
4. The optical radiation of the led lamp meets the IEC62471-2005
exemption level requirements.
Smart Ceiling Light
& Smart Strip Light
User Manual
6
≧1450lm
KD2/3
Smart light
ceiling
AC90-265V
50/60HZ
2700-6500K+RGB
AC90-265V
50/60HZ
AC90-265V
50/60HZ
Smart light
ceiling
18 W
＞
80
∅
330*100mm
＞
20000h
2.4GHz
802.11b/g/n
Smart light
ceiling
≧1900lm
KD2/3
23 W
＞80
∅
385*110mm
＞20000h
AC90-265V
50/60HZ
2.4GHz
802.11b/g/n
Product:
Luminous Flux:
Adapter input
voltage
Led Quantity:
CCT
wattage:
Ra:
Strip width:
Strip length:
Working Hours:
Wireless
Connect:
Smart light strip
35-45 lumens
(lm)/W
AC100-240V 50/60Hz
（Output Voltage：DC 24V 2A）
30 LED/m
3000K+RGB
6 W/m
＞80
0.5 in(12mm)
16.4 ft(5m)
＞20000h
2.4GHz
802.11b/g/n
Smart light strip
40-50 lumens
(lm)/W
AC100-240V 50/60Hz
（Output Voltage：DC 24V 2.5A）
48 LED/m
10 W/m
＞80
＞20000h
2.4GHz
802.11b/g/n
Smart light strip
50-60 lumens
(lm)/W
AC100-240V 50/60Hz
（Output Voltage：DC 24V 3A）
60 LED/m
12 W/m
＞80
＞20000h
2.4GHz
802.11b/g/n
2. Installing strip
Use the docking terminal cable to make the lamp strap and the adapter
better connected.The back of the lamp strip has double-sided tape.Before
fixing the lamp strip,it is best to wipe the towel with a place to be glued.This
can better stick the lamp strip.On the table or on the glass.Not only that,but
also the time for fixing the lamp strip is extended,and the lamp strip is not
easy to fall down.
Attention
1. Please insure the power is turned off when installing,removing or
inspecting the ceiling.
2. Please don’t install the ceiling to dimmable appliances in case of
damaging the ceiling (For example,dimmable desk lamp).
3. Please don't use it in a damp environment.
4. It is not recommended to use the ceiling in a narrow or sealed space in
case of losing signals or bad heat dissipation.
Smart Control
This product is compatible with the smart platform and can be controlled
by”Smart Life APP”or “Tuya Smart APP”,supporting smart voice control
such as Amazon echo, Google Home,etc.Simplified steps to install App on
your smart device and pair with Amazon Alexa,Google Assistant using
Smart Life App on Apple Store/Google Play Store Compatible with any
smart phone or including any Android and Apple device.
How to connect Smart Device to Wi-Fi network
Download Smart Life from or .Download or scan the QR code and
install the Smart Life App for either IOS or Android.Once downloaded,the
app will ask you to register your device.Enter your phone number or email
whichever one makes you feel comfortable and select the country you live
in.If phone number is selected you will receive a text with a registration
code.If you choose email you will then create a password.
Android
IOS
Use your phone to control your lights
1.Download the Smart Life app,click to enter the app,log in or register an
account.
4.connect to the network,smart life APP will find your lights,when it reaches
100%,you can use your mobile phone to control your light bulb. For your
convenience,you can give your own light bulb a name,like: bedroom light.
How to connect Smart Device to Amazon Alexa
1.Click on Smart Life App,sign in your account and make sure Smart Light is
in the device list.
2.Modify device name so that Alexa can easily recognize,such as Living
room Light,Bedroom light.etc.
3.Minimize Smart Life App,then click the Alexa APP and sign in your Alexa
account and make sure you have at least one Alexa voice-controlled device
installed like Echo,Echo dot,etc.
4.In the upper left corner of the Home page,click“Home”the button to show
the App menu.Then click “Skills” in the menu.