User's Manual

1
Specification
Factory Reset
Turn on and off the lamp 5 times.Hold for 2 seconds when the lamp is turned
on or off.For the 5th time,hold the turn-on mode for about 5 seconds.
If the light blinks,which means the lamp is reset successfully.
Installation
1、Installing ceiling
Install the ceiling and turn on the power switch.
Use quick-connect terminal wiring. Turn the mask open, insert the
pre-wired terminals into the quick-connect terminals, then fix the
ceiling lamp, a peripheral switch, and finally install the top cover.
that's it.
Product:
Smart light ceiling
Smart light ceiling
Luminous Flux:
＞880 lm
＞1480lm
Input Voltage:
AC 100-240V 50/60HZ
AC 100-240V 50/60HZ
Lamp Base:
KD2/3
KD2/3
Rated Power:
11 W
18 W
Size:
∅ 270*85mm
∅ 340*100mm
Lifespan:
＞20000h
＞20000h
Wireless Connect:
2.4GHz 802.11b/g/n
2.4GHz 802.11b/g/n