User's Manual

1
Specification
Factory Reset
Turn on and off the lamp 5 times.Hold for 2 seconds when the lamp is turned
on or off.For the 5th time,hold the turn-on mode for about 5 seconds.
If the light blinks,which means the lamp is reset successfully.
Installation
1.Installing bulb
Install the bulb and turn on the power switch.
Attention:
1.Pls insure the power is turned off when installing,removing or
inspecting the bulb.
2.Pls don’t install the bulb to dimmable appliances in case of
damaging the bulb (For example,dimmable desk lamp).
Product:
Smart light bulb
Luminous Flux:
＞720 lm
Input Voltage:
AC 100-240V 50/60HZ
Lamp Base:
E26/E27
Rated Power:
8 W
Size:
128*70*70mm
Lifespan:
>20000h
Wireless Connect:
2.4GHz 802.11b/g/n