Smart LED Bulb User Manual
Specification Product: Smart light bulb Luminous Flux: ＞720 lm Input Voltage: AC 100-240V 50/60HZ Lamp Base: E26/E27 Rated Power: 8 W Size: 128*70*70mm Lifespan: >20000h Wireless Connect: 2.4GHz 802.11b/g/n Factory Reset Turn on and off the lamp 5 times.Hold for 2 seconds when the lamp is turned on or off.For the 5th time,hold the turn-on mode for about 5 seconds. If the light blinks,which means the lamp is reset successfully. Installation 1.
.Pls don’t use it in damp environment. 4.It is not recommended to use the bulb in narrow or sealed space in case of losing signals or bad heat dissipation. Smart Control This product is compatible with the smart platform and can be controlled by "Smart Life APP",supporting smart voice control such as Amazon echo, Google Home,etc.
3. Follow the in-app instructions to connect the Smart Light to your Wi-Fi network. 4.Once connected,the App will prompt the connection,and click“Done”. 5.Now you can control the Mini Smart Light through Smart Life App. 6.Once the configuration is completed successfully,the indicator light will turn to solid blue and the device will be added to the“Device List”. Use your phone to control your lights 1、Download the smart life app, click to enter the app, log in or register an account.
2、Click Add Device and select Smart Lighting---Lighting Devices. 3、Switch the bulb quickly 3 times, and turn it on for the fourth time. The bulb will flash. Now you can click on Confirm light blinks rapidly on the app.
4、connect to the network, smart life APP will find your lights, when it reaches 100%, you can use your mobile phone to control your light bulb. For your convenience, you can give your own light bulb a name ，like: bedroom light. How to connect Smart Device to Amazon Alexa 1. Launch Smart Life App, sign in your account and make sure Mini Smart Light is in device list. 2. Modify device name so that Alexa can easily recognize , such as Living room Light, Bedroom light. etc. 3.
5. Type in“Smart life”in the search and click the search button next to it.
6. Enable Smart Life Skill,the sign in your Smart Life account to complete the account linking.
7. After successful account linking,ask Alexa to discover devices.After a 20-second device discovery.Alexa will show all the discovered devices.
8. Back to Menu by clicking “Home” button,and then click “Smart Home”button. 9. In Smart Home page,you can group your devices for different categories. Your Smart Life APP has been skilled with Alexa.Now you can control your Smart Light through Alexa.
How to connect Smart Device to Google Home 1. Launch the Google Home App and make sure Google Home speaker is installed.If not,please follow Google Home speaker installation instruction to complete the installation. 2. Once Google Home is installed,in the upper left corner of APP Home page ,clicking button to show APP menu,and clicking“Home Control” 3. On“Add devices”page, scroll down to find“Smart Life”and then click it.
4. After successful account lining,in Google Home App you can see all the smart devices from your Smart Life App account.You can assign rooms for each device. 5.
Product Features Color Adjustment Brightness Adjustment Timing Switch Voice Control One-key Open ration Phone Control Scene Mode Switch Firmware Upgrade Product Performance Fault List The bulb is not working when powered on. The bulb is blinking abnormally. Lacking of color or can't change color. Performance failure APP can't connect with or control the bulb, causing by the bulb itself. Non-human factor (structure damage) affecting the use of bulb or some other safety abnormality.
FCC Requirement changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
