User's Manual

Instructions:
Fashion design BandPhones (2018BP4)
How to connect your BT wireless device:
1. Turn your Bandphones speaker on by pressing and holding the power button on the speaker
middle until you heard the audible beeps and/or the indicator LED will start fast blinking with
blue and red alternately.
2. Turn on BT on your device (smartphone or tablet) and search for new BT device.
3. Choose the name “Bandphones” and connect when it appear on your search list.
4. When successfully connected the indicator blue LED will slowly blink.
(Bandphones will auto reconnect to a paired BT device when powered on)
Using Your BandPhones:
1. Long press the power button to turn the speaker on or off.
2. Short press the power button to pause/or resume music.
3. Short press the power button to answer/or hang up a phone call.
4. Long press the power button to reject a phone call.
Charging the Battery:
When the battery is running low, the speakers will make a beeping sound the red LED indicator
will start to blink. Charge your Bandphones by plugging in your USB charger to the Bandphones
speaker input port on the side of the speaker. When charging the battery the LED indicator will
turn red. When the battery is fully charged the red indicator LED will stop illuminating.