Operating Instructions

3. Point to Point Connection（Password Setting）
The device is used at the first time, please initialize the camera.
1. Move the toggle button of the switch to the position of "ON", then the red
and blue lights will be on. Wait for 40 seconds, and the light will be on. The
camera is on. ( Voice guide in this process “System is starting”--”System
startup completed”--”Access-Point preparing”--”Access-Point ready “)
2. Please press and hold the RESET button for 3 seconds, the light changes to
red and blue. Voice guide “ Restore factory default setting”--”Access-Point
preparing”. After about 20 seconds, the light changes into red light only. That
means the camera has been reset successfully.
3. Open the mobile phone WiFi list and connect to "MV***" WiFi, such as:
MV35804985, please wait for 1 minute after connecting to WIFI.
3. When the mobile phone is connected to the camera WiFi, open the mobile
APP(V380 Pro) pull-down interface to refresh the data and automatically add
the device
On