REMOTE TRAINING COLLAR operating and training guide USER MANUAL For 1 Dog For 2 Dogs CH For 3 Dogs Please read this entire guide before beginning
TABLE OF CONTENTS PACKING COMPONENTS SPECIFICATION PRODUCT INTRODUCTION OPERATION GUIDE Charging Transmitter Receiver Pairing Transmitter & Receiver PRODUCT ASSEMBLY AND TESTING Static Stimulation Column and Test Receiver Collar Fitting FREQUENTLY ASKED QUESTIONS CAUTION REFERENCE SIZE FOR DIFFERENT DOGS DECLARATION OF CONFORMITY PRODUCT MAINTENANCE/AFTER-SALES 1 1 2 4 4 4 6 6 7 7 7 8 10 11 12 13
PACKING COMPONENTS Neck Strap For Transmitter REMOTE TRAINING COLLAR operating and training guide USER MANUAL For 1 Dog Collar Receiver For 2 Dogs CH For 3 Dogs Please read this entire guide before beginning Test Light CH Remote Training Collar Operating and Training Guide Contact Points Conductive Silicone Jacket SPECIFICATION Model: T680 Material: ABS + PC Charging Method: DC + USB Mode: Tone + Vibration + Static stimulation Receiver Waterproof Grade: IPX6 Remote Range: Up to 450 yards (400
PRODUCT INTRODUCTION Led Screen Display Antenna LED Indicator Light White Backlit LED Display Intensity Level Adjustment Tone Button Vibration Button Static Stimulation Button CH 2 CH: Selecting Channels
PRODUCT INTRODUCTION Belt Clip Waterproof Charging Jack (with cover) Neck Strap Pin Contact Points Charging Jack(with cover) LED Indicator Light On/Off Button 3
OPERATION GUIDE 1.Charging (please ensure the product fully charged before use) Connect the charger cable to the transmitter/receiver’s charging ports and ensure good contact; It takes about 2 hours to fully be charged when connected to output of charger (Transmitter (on/off) battery bar scrolls when charging and stays still when fully charged. Receiver red light will be turned on when the charging cable is plugged in. The green light will always be on when it is fully charged).
❷ Tone Button Level 0. When pressed, 0 is displayed on transmitter, with green indicator lights flash on transmitter and receiver. ❸ Vibration Button Level 0-8. When pressed, level digit is displayed on transmitter, with green indicator lights flash on transmitter and receiver. CH ❹ Static Stimulation Button Level 0-16. When pressed, level digit is displayed on transmitter, with red indicator lights flash on transmitter and receiver.
3.Receiver Power on: Press once to turn it on, with one beep sound and green indicator light flashes. Power off: Press once to turn it off, with two beep sounds and red indicator light flashes. Power on Power off 4.Pairing Transmitter & Receiver ❶ Turn on the remote control transmitter and press the " button to select a signal channel. CH " ❷ Long press the receiver on/off button for 3 seconds and its red indicator light enters a fast flashing state, lasting for 10 seconds.
PRODUCT ASSEMBLY AND TESTING 1.Static Stimulation Column and Test ①Tighten the column screw into the screw hole of the receiver. ②Put on the conductive silicone cap. ③Insert the test light on the silicone cap. ④Press the static stimulation button of the transmitter. ⑤The test light shows red as static stimulation function is on. 2.Receiver Collar Fitting Fit the receiver collar correctly to ensure effective operation. Please follow the steps below to fit it: A.
A B B FREQUENTLY ASKED QUESTIONS Q: Once my pet is trained and has been obeying my commands, will he/she have to continue to wear the receiver collar? A: Probably not. You may need to reinforce training with the receiver collar from time to time. Q: How long should I process my training session for my pet? A: Training sessions should be kept positive and short, better for about 10-15 minutes each time.
Q: Does the product have after-sales service? A: Our products have after-sales service. As long as it is a quality problem and not caused by man-made damage or misoperation, it can be guaranteed within 1 year. Q: Is the vibration function safe for my pet? A: Although vibration is unpleasant, it is harmless to your pet. Electronic training equipment requires user interaction and training to achieve the desired effect.
CAUTION Warning： A. This product is suitable for large, medium and small dogs. B. This product cannot be tried directly on humans, otherwise it will violate local laws. C. Please turn off or take off the receiver before playing with the dog. D. Please do not put the receiver on the dog for a long time. Warning： A. It is strictly forbidden to be played by children as toys. B. It is strictly forbidden to place the product near the stove or in a high temperature place. C.
REFERENCE SIZE FOR DIFFERENT DOGS REFERENCE SIZE FOR DIFFERENT DOGS Size Chest Back Neck(In) Measurement Lenght (In) (In) Mini 7.8-8.6 9.8-11.8 7.5 Small 7.8-9.5 11.4-14.2 9 Medium 9.0-11.0 13.7-16.5 11 Chihuahua,Yorkshire Terrier Chihuahua,Yorkshire Terrier,Poodle, Pomeranian Maltese Dog, Shih Tzu Type Large 9.6-12.2 16.2-18.5 12.2 Miniature Schnauzer, Pekingese Large 11.8-13.4 18.1-20.8 13.8 Schnauzer,English Cocker Spaniel Large 13.0-14.5 20.5-23.2 15.7 Beagle Huge 17.0-18.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
PRODUCT MAINTENANCE/AFTER-SALES 1.If you find that there is a problem within 30 days upon receiving the product, you need to take a video or picture of the faulty product. After the customer service confirms, you can return the product. Product with quality problem must be returned within 7 days. Replacement will be shipped upon receiving the returned product. 2.
