How-To Guide

theledindicatorofreceiverturntogreen



‐‐Pressandholdthepairbuttonoftransmitter2‐3seconds,ThentheLedindicator

Willflashawhileandstarttothepairmode.TheledindicatorofTransmitterwillturntoblue

(NoFlash)after25seconds,ThenPairmode

iscompleted.

Note: The Led indicator of transmitter will only flash 25 seconds, So Please completed this step within 25

seconds.



Notice

Torechargethepowercase,Pleasemakesurethatyourpoweradapterhasapoweroutputof5V

and1A(orhigher)



Specifications

‐‐UHFoperatingfrequency

‐‐Lowlatencysignaltransmitting,Lessthan5ms

‐‐Frequencyresponse20HZ‐18Khz

‐‐Tr ansmitterandreceiver:3.7v/700mAh

‐‐Batteryruntime8hours(approx)

‐‐Range：30‐50M(Emptyenvironment）

Note: Actual range is dependent on RF environment, including reflections, interference and absorption



Foranyquestion,PleasemailusCS@kawlita.com，

Wewillreplyyouassoonaspossible.

