User's Manual

Input Select

INPUT

SELECT

• Select [DVI] by pressing the INPUT

SELECT button of the Remote Control or

PDP unit.

• Each time you press the INPUT SELECT

button, a different input mode appears. The

sequence is as follows:

DVI --> Component 1 --> Component 2 -->

Video 1 --> Video 2 -->PC.

Enjoy Dynamic Ultra Screen Monitor by

Using PC’s Keyboard or Mouse.

Press the Power button.

• Turn on the PDP and the PC.

NOTES:

1) The resolution of the PC monitor is best at {50” : 1024 x 768

(XGA)}, {42” : 640 x 480 (VGA)}.

2) If there is a [Vertical Frequency]setting menu in the [Display]

Menu of the PC, adjust the frequency to 60Hz.

3) If the PC resolution is too high, it may be hard to read letters.

Select a suitable resolution.

4) DVI input port receive only Digital Signal.

5) Depending on the graphic card when plug & unplug the DVI

connection the screen may not display correctly.

Restart the computer if this happens.

DVI

Component2Component1

Video1Video2PC