User's Manual

59
NOTES:
1) If an external device is not connected or INPUT signal is not
applied, Warning Message (“No Signal”) would be displayed.
2) In this case, check if external device is connected and/or
terminal connection is properly done.
3) Also, you can select input using [INPUT SELECT] button in
the keypad of the pdp set.
The used sequence is as follows:
Video1 -> Video2 -> TV -> PC -> DVI -> Component1 ->
Component2 -> Video1
Component 1
Component1
PC
DVI
Component2
Video1 Video2
TV
•“ MULTIMEDIA
”
”
button
•“ TV/VIDEO
”
”
button