User's Manual

Input Select

MULTIMEDIA

• Select [Component 1 or Component 2] by

pressing the “Multimedia” button of the

Remote Control or the "INPUT SELECT"

Key in KeyPad of the pdp set.

• Each time you press the “Multimedia”

button, different input modes appear. The

sequence is as follows:

Select a Desired Channel and Function

• Select a desired channel and function by

using the Remote Control of Digital

Broadcasting Receiver.

NOTES:

1) Possible Digital Broadcasting signals: 1080i, 720p, 480p.

2) Antenna Connection:

Apartment : Check if community antenna receives digital broadcasts.

Private Houses: Set the indoor/outdoor UHF antenna to the direction

of the digital broadcasting transmitting company.

3) For detailed connection method, refer to the Owner’s Manual of Digital

Broadcasting Receiver.

4) What is a component? : Signals with which brightness and color are

separated, producing a sharp picture.

5) If the Digital Broadcasting Receiver has PC Output terminal or DVI

Output terminal, connect to ‘PC INPUT’ or ‘DVI INPUT’ at the back

panel of the PDP.

When watching the PDP by PC or DVI Input, some undesired signals

may be seen at the top and bottom area of the screen. In this case,

select [Menu] --> [Screen] --> [V. Size] to adjust.

Component1

DVI

Component2