Manualshelf

User's Manual

ManualsBrandsDongbu Daewoo Electronics ManualsLED & LCD TVs42" PDP Monitor
21222324252627282930
Parts of the Remote
Controller
22
This remote controller is universal; thus, it may be convertible for TV, Video, CTV, etc.
1. DISPLAY: Display the present modes (ATV/DTV, Video1/2,
COMP.1/2, HDMI and PC) and signal
information.
Note: In Analog TV mode, you can see information about the
Channel number, Sound, and Clock. In Digital TV mode,
you can see information about a channel number,
name, broadcasting time and more.
2. (POWER): Turns the TV on and off.
3. GUIDE: Access Electronic Program Guide (EPG). It works
only in DTV mode.
4. TV/VIDEO: Each time you press this button, the TV will cycle
Through: TV
Video1/2(S-Video1/2)
Comp.1/2 HDMI PC TV
5. MULTIMEDIA: Each time you press this button, the TV will
cycle Through: TV
Comp.1/2 HDMI
PC TV
6. NUMBER: Press the numbers on this board; you can select
CH directly in TV mode. (EX: When you want to
select CH10, you should press down “1” and “0”
within 2second. If you only press down “1”, after
2second, CH1 will be selected.)
Note: When the current state is Stand-By mode, you can turn
on the TV using the digit key. Then channel is selected
according to digit number.
7. STILL: Press this button to freeze the picture.
8. 100 BUTTON: Press to select additional channels
above100.
9. PREV CH: Press this button, you can tune to the previous
channel.
10. (MUTE): Press this button, and the sound goes off. Press
again, and the sound returns.
11. VFAVW: Press to switch to your favorite channels.
12. VCHW: Press to switch to your favorite channels in
sequence.
13. CVOLB: Adjust the volume.
14. SCREEN SIZE: Select screen aspect ratio. 16:9
4:3
LB[16:9] LBS[16:9)
Note: When current mode is multimedia (PC and HDMI), the
aspect only work as the 16:9 or 4:3 mode. And "Screen
Size" function is not available in PIP mode.
15. CAPTION: Controls the caption decoder.