User's Manual

PC
Connection
16
S-VIDEO 1
AV 1 COMPONENT
L-AUDIO-R
VIDEO L-AUDIO-R
MONITOR OUT
DIGITAL
AUDIO
OPTICAL
AUDIOHDMI
INPUT
SERVICE INPUT
1. Adjust PC resolution to available resolution in PDP TV.
2. Connect between PC and TV set using the D-Sub and Audio cable like below the picture.
3. Turn on the PC and TV set.
4. Select PC mode by pressing “MULTIMEDIA” button on the remote control or “TV/VIDEO” button of the
TV set.
S-VIDEO 1
AV 1 COMPONENT
L-AUDIO-R
VIDEO L-AUDIO-R
MONITOR OUT
DIGITAL
AUDIO
OPTICAL
AUDIOHDMI
INPUT
SERVICE INPUT
1. Adjust PC resolution to available resolution in PDP TV.
2. Connect between PC and TV set using the HDMI and Audio cable like below the picture.
3. Turn on the PC and TV set.
4. Select HDMI mode by pressing “MULTIMEDIA” button on the remote control or “TV/VIDEO” button of
the TV set.
REAR OF THE TV SET
REAR OF THE TV SET
When connecting with PC(D-Sub) cable.
When connecting with a HDMI cable.
Note : If the graphic card of the PC only support DVI signal, you must connect the Audio cable like above the picture.