User's Manual

Volume up/down

Increase or decrease volume in a call or playback

0~9,*,#

same function in phone

Connecting Your Phone to the bluetooth hands free Car Kit

Before you can use this car kit, you must complete a Bluetooth connection between the kit

and your phone. You establish a Bluetooth connection between your car kit and phone with a

paired link.

When you set up a paired link, the car kit remembers the phone’s ID. Once the car kit and

phone are paired, your car kit automatically connects to your phone every time

you start your vehicle .

This system supports paired links with up to 3 phones.

Note: The process of initiating a Bluetooth connection with a phone varies per phone

manufacturer. For more information, refer to the user’s guide for your phone.

Initial Pairing

Note: Use this procedure ONLY if there are no phone paired to the system.

With the car kit and phone in close proximity:

1 Press the transfer button (phone diagram) in the Remote Control Keypad more 2 seconds

until beep tone is generated..

2 When prompted, display “TEL MUTE or VOICE IN” on the audio display for 3~4 seconds

Set your phone in scan mode and enter “0000” when prompted for the passcode.

If there is not “MDMTEC 1100” one more attempt 1~2.

You can pair the phone with the car kit for 60 seconds after pressing transfer button (phone

diagram)

3 When the phone displays the device name (MDMTEC 1100), select the device.

The phone displays the pass code entry screen.

4 Enter the passkey (0000).

The phone displays “PIN verified,”

Note: Some phones ask you to accept the BT link.

Enter Yes.

Upon successful completion, connection is complete.

LED indicator is on.