User's Manual

English - 5
English - 4
CONNECTING THE SPEAKERS
Use the speakers as shown in the illustration after pressing
down the supporter located on the rear of the speaker if you
don’t attach the speakers to the monitor.
1
2
3
4
5
ABOUT SPEAKER BUTTONS
ABOUT SPEAKER BUTTONS
SPEAKER ST
SPEAKER ST
AND-ALONE
AND-ALONE
Push
AC POWER
S-Video
Video
AUDIO
R
L
Speaker R
Speaker L
1. Align the two hooks on each speaker with the holes on the right
and left side of the monitor and insert the hooks into the holes.
2. Plug the connector of the POWER (DC IN 12V) Jack of the
speaker R into the adapter cord . Plug the other side of the
adapter cord into a AC power outlet.
3. Plug the connector of the MONO Jack of the speaker R into
the input port of the speaker L.
4. Plug the connector of the STEREO (AUDIO INPUT) Jack
of the speaker R into the SPEAKER port on the rear of the
monitor.
5. After setting up the speakers, switch the power on and adjust
the volume to the proper level.
1
1
2
2
3
3
4
4
5
5
7
7
6
6
: Headphone Jack
VOLUME (UP/DOWN)
MUTE
POWER
POWER Indicator
1/2
3
4
5
adjusts audio volume.
(up) : increases speaker volume.
(down) : decreases speaker
volume.
turns mute function on and off.
turns audio on and off.
shows power on and off status
with power indicator light.