User's Manual

CONTRAST
English - 13
SELF DIAGNOSIS
English - 12
OSD FUNCTIONS WITH USING VIDEO
VOLUME
BRIGHTNESS
CONTRAST
COLOR
SOUND
Adjust the contrast of image, the
difference between light and dark areas on
the screen.
CONTRAST
Adjust saturation of image.
Increase or decrease audio volume.
Adjust the brightness of image.
Adjust the contrast of image.
SATURATION
Adjust the hues of image.
HUE
Adjust the display image quality (if the
screen proceed to scaling up).
SHARPNESS
Adjust high frequency response.
TREBLE
Adjust low frequency response.
BASS
If there is no image, the Self Diagnosis screen will be displayed.
Self Diagnosis function checks if the status of the monitor screen
is No Signal, Out of range or None support.
No Signal screen is displayed when the D-
Sub signal connector is not connected or
the status of the monitor is on DPMS
mode.
Out of Range screen is displayed when the
applied frequency is under or over normal
range.
Normal range
(Non-interlaced mode only)
H : 30 - 80 KHz
V : 56 - 77 Hz
None support screen is displayed when the
applied frequency is under or over factory
preset timings.
Balance audio sound.
BALANCE