User's Manual

English - 11
SPECIFICA
SPECIFICA
TIONS
TIONS
a
English - 10
SELF DIAGNOSIS
If there is no image, the Self Diagnosis screen will be displayed.
Self Diagnosis function checks if the status of the monitor screen
is “No Signal”, “Out of range” or “Check Cable”.
“No Signal” screen is displayed when the
D-Sub signal connector is not connected or
the status of the monitor is on DPMS
mode.
“Check Cable” screen is displayed when
the D-Sub signal connector is not
connected.
“Out of Range” screen is displayed when
the applied frequency is under or over
normal range.
Normal range
(Non-interlaced mode only)
H : 30 - 62 KHz
V : 50 - 75 Hz
Panel Size 15-inch(38cm) diagonal
Pixel Pitch 0.297 x 0.297mm
Viewing Angle 60°(Right/Left)
40°(up), 60°(down)
Contrast Ratio 350:1 contrast ratio(typ)
Brightness 250cd/m
2
brightness(typ)
Color Filter RGB vertical stripe
Synchronization Horizontal 30 - 62KHz
Vertical 50 - 75Hz
Video Bandwidth 80MHz
Max Resolution(Optimal) 1024 x 768 75Hz
Colors 6bit(16.7M Colors)
Display Area 304.1mm x 228.1mm
PC Input Signal Sync H/V separate (TTL)
Video 15 pin mini D-sub(Analog RGB)
DVI-D(Option)
AV Input Signal Video CVBS(RCA), S-Video(Mini-DIN)
(Option) Audio RCA Left+Right Input
Stereo Mini Jack Input & Output
TV Receiving Signal TV Tuner NTSC, PAL
(Option)
External Speaker Max. Output 6W(Left 3W+Right 3W)
(Option)
Plug and Play VESA DDC Compatible
Power Source 100-240Vac, 50/60Hz(Free Voltage)
Power Consumption 26W
Dimension-W x H x D 370 x 352 x 205mm (with stand)
370 x 312 x 60mm (without stand)
Weight-net/gross 4.2/5.5Kg (9.2/12.1 lbs)
Power Saving EPA, VESA DPMS, Nutek Compliant
Tilt Range 5° forward, 30° backward
Operating Temperature 10 ~ 40°C /50 ~ 104°F