User's Manual

1. Press the STEAM CLEANING button. The STEAM indicator ( ) lights.

The oven heats up for 10minutes.

When heating up is complete the “door” “oPEn” blinks on the display.

You may remove the mug cup and use the moisture in the oven to clean the

inside of oven cavity.

2. After heating up ends, "door" "oPEn" shows on the display for 5 minutes.

Once it passes 5minutes, automatic cooling mode starts.

Note: High temperature in the inside of oven may reduce the effect of steam power.

Cool it down to the room temperature before use.

Note: Once the dish warmer mode ends, please do not grasp a dish or an rack with your bare hands that it may be hot. We

recommend wearing heat-resistant gloves.

The DISH WARMER mode allows the oven to Warm dining dishes/plates before serve the food.

The premium option model comes with the specially designed Dish-Warm Rack used for the dish warmer mode only. Please take out

the glass turntable and place the dish-warm rack at the center of the oven cavity.

Then place dishes/plates (Size ranges from Ø150~Ø260mm) on the rack.

DISH WARMER (For Premium option model only)

1. Keep press the WARM button to select the desired temperature. (from 105F ~

175F)

2. Turn the dial knob to set the desired dish Warm time.

(from 10 sec.~ 60 minutes)

3. Press the START/SPEEDY COOK button.

The oven light comes on and the turntable starts rotating.

Warming starts and the time in the display counts down.

This function uses steam to clean the inside of oven.

Before cleaning, put 150~200cc water in a mug cup or a small bowl and place it at the centre of the tray.

STEAM CLEANING

To remind you that you have food in the oven, the oven will beep once a minute until you either open the oven door or press any button.

REMINDER MODE (Function to remind cooking complete)