User's Manual

This section includes useful information about oven operation.

OPERATION PROCEDURE

WATTAGE OUTPUT CHART

• The power-level is set by touching the POWER pad. The chart shows

the display, the power level and the percentage of power.

Touch the Power pad Power level (Display)

Approximate Percentage

of Power

once P-HI 100%

twice P-90 90%

3 times P-80 80%

4 times P-70 70%

5 times P-60 60%

6 times P-50 50%

7 times P-40 40%

8 times P-30 30%

9 times P-20 20%

10 times P-10 10%

11 times P-00 0%

Plug power supply cord into a standard 3-pronged 9 Amp, 120V AC

60Hz power outlet.

After placing the food in a suitable container, open the oven door and

put it on the glass tray.

The glass tray and roller guide must always be in place during

cooking.

Close the door. Make sure that it is firmly closed.

The oven light is on when the microwave oven is operating.

The oven door can be opened at any time during operation by opening

the door. The oven will automatically shut off.

Each time a pad is touched, a BEEP will sound to acknowledge the

touch.

The oven automatically cooks on full power unless set to a lower

power level.

The display will show “ : 0” when the oven is plugged in.

Time clock returns to the present time when the cooking time ends.

When the STOP/CLEAR pad is touched during the oven operation, the

oven stops cooking and all information retained. To erase all

information(except the present time), touch the STOP/CLEAR pad

once more. If the oven door is opened during the oven operation, all

information is retained.

If the START pad is touched and the oven does not operate, check

the area between the door and door seal for obstructions and make

sure the door is closed securely. The oven will not start cooking until

the door is completely closed or the program has been reset.

Make sure the oven is properly installed and plugged into the electrical

outlet.

KOR-4A6B(영)_미주향(A5).indd 8 2017. 6. 13. 오후 5:15