User's Manual

HOW TO SET THE OVEN CONTROLS

SETTING THE CLOCK

When the oven is first plugged in, the display will flash “:0”. If the AC power ever goes off, the

display shows “:0” when the power comes back on.

1. Touch CLOCK pad.

This is a 12 hour clock system.

2. Touch CLOCK pad once more.

This is a 24 hour clock system.

3. Enter the correct time of day by touching

the numbers in sequence.

4. Touch CLOCK pad.

TIME DEFROSTING

When DEFROST is selected, the automatic cycle divides the defrosting time into periods of

alternating defrost and stand times by cycling on and off.

1. Touch DEFROST. pad.

2. Touch number pads for the desired defrosting time.

3. Touch START pad.

When you touch START pad, the DEF indicator starts blinking to show the oven is in the DEFROST

mode. The display counts down the time to show you how much defrosting time is left in the

DEFROST mode. The oven beeps during the defrosting cycle to signal that the food needs to be

turned or rearranged. When the defrosting time ends, you will hear 3 beeps.

<The display stops blinking, and the colon starts blinking. If

you selected 12 hour clock system, this digital clock allows

you to set from 1:00 to 12:59. If you selected 24 hour clock

system, this digital clock allows you to set from 0:00 to 23:59>

NOTE: If you attempt to enter an incorrect time, the time will not be set and it will return to previous

status. Touch the CLOCK pad and re-enter the time.

Note : Your oven can be programmed for 99 minutes 99 seconds(99 : 99)