User's Manual

28
Selecting cable or antenna viewing
You must set the viewing mode for your VCR, choosing
either CABLE (cable system connection) or ANTENNA
(antenna connection).
To set the viewing mode:
Press [ENTER] to toggle the setting between CABLE and
ANTENNA in CHANNEL SET screen.
When the desired viewing mode is displayed, press
[SETUP] twice to exit.
CHANNEL SET
Auto Channel Search
Add/Remove Channels
Signal Type: CABLE
Cable Box Setup
Channel Change: CH3
Move: Select:
End:
SETUP
ENTER
Memorizing TV Channels
To Set Cable Box
To Set Output Channel
Press [SETUP] button and select “CHANNEL
SET” .
Select “Channel Change”.
By pressing [ENTER] button, set the exclusive channel for
video on the desired one of CH3 or CH4.
Press [SETUP] button and select “CHANNEL SET”.
Select “Cable Box Setup”.
Move into Cable box setup with [ ]
button and then, select the desired item with
[ENTER] button.
1
1
2
2
Select “Cable Box Channel”.
Press the channel number which matches to the
output of the Cable Box to connect between Cable
Box and this unit.
3
3
CABLE BOX SETUP
On what channel do you
want to receive from
the cable box?
- -
CHANNEL SET
Auto Channel Search
Add/Remove Channels
Signal Type: CABLE
Cable Box Setup
Channel Change: CH3
Move: Select:
End:
SETUP
ENTER
CHANNEL SET
Auto Channel Search
Add/Remove Channels
Signal Type: CABLE
Cable Box Setup
Channel Change: CH3
Move: Select:
End:
SETUP
ENTER
Input:
Video: End:
SETUPOUTPUT
DV6T812N-LT(GB) 02.8.5 9:24 PM ˘`28