User Manual

PRESS BUTTON #2 FOR A SECOND (CHIRP SOUNDS 3 TIMES)


 REMOTE START OFF
PRESS BUTTON #1 TWICE


 PASSIVE/ACTIVE SELECTION
PRESS THE BUTTON #1 & 2 SIMULTANEOUSLY FOR 10 SECONDS AT VALET
MODE
“ON” POSITION.
ONE CHIRP SOUND : ACTIVE MODE
TWO CHIRP SOUND : PASSIVE MODE


 REMOTE START ON EXTENSION(UNDER REMOTE START ON
POSITION)
1) PRESS THE BUTTON #2 FOR 5 SECONDS THEN START ON TIME WILL
BE EXTEND
TO 25 MINUTES FROM BASIC 15 MINUTES AT ONE CHIRP SOUND
2) PRESS THE BUTTON #2 FOR 5 SECONDS AGAIN THEN START ON TIME
WILL BE REDUCED TO BASIC 15 MINUTES AT TWO CHIRPS SOUND.


 REMOTE START MOTOR OPERATION PERIOD ADJUSTMENT
PRESS THE BUTTON #1 & #2 SIMULTANEOUSLY FOR 5 SECONDS
ONE CHIRP SOUND : SHORT START TIME (0.7 SEC)
TWO CHIRP SOUND : STANDARD START TIME (1.0 SEC)
PRESS THE BUTTON #1 & #2 SIMULTANEOUSLY FOR 10 SECONDS
THREE CHIRP SOUND : LONG START TIME (1.3 SEC)
FOUR CHIRP SOUND : ULTRA LONG START TIME (1.5 SEC)


 CONFIRMATION OF CHIRP SOUND DELETE (SILENT MODE)
MAKE THE VALET MODE “ON” (VALET S/W “ON” + ACC “ON”)
THEN THE ACC S/W OFF, PRESS THE BUTTON #2 FOR 10 SECONDS