CD/Cassette Boombox YM-8368 User Manual
Warnings and Precautions This symbol ,located on the back or bottom of the unit, is intended to alertthe user to the presence of uninsulated “dangerousvoltage“within the Product’s enclosure that may constitutea risk of electric shock to persons. This symbol, located on the back orbottom of the unit, is intended to alertthe user to the presence of importantoperating and maintenance (servicing)instructions in the literature Accompanying the appliance.
Location Of The Controls 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. Volume – 11. Playing mode 12. Power ON/OFF/TAEP/RADIO Function switch button 13. Program 14. Volume + 15. Power indicator 16. LCD display 17. CD rewind 18. Play/pause 19. BAND/FM/AM frequency switch 20. CD Forward 21. CD Pause 22. Left /right speaker 23.
24. AUX jack 25. Earphone jack 26. AC socket 27. Battery door 28. USB port CD Operation ) to CD/MP3 position. 1. Move the function switch ( 2. Press CD door/off button ( ), open the CD door, insert the disc (label side up) and close the door. Several seconds after closing the door, it will automatically play the first song. The LCD display will show “CD”, “MP3” according to the inserted type of CD. 3. To adjust Volume button (V-) or (V+) to be your desired level and enjoy the music. 4.
B. Press the button a second time, it will repeat the whole disc, the LCD will show “REPEAT” as in figure 2. C. when you press the button for the third time, the player will randomly playback, the LCD will show “RAN” as in figure 4. D. when you press the button for the fourth time, the player will turn back to normal playback. When play the CD -R/CD/RW; MP3 A. During CD playing mode, press (MODE) button, it will repeat the current song, the LCD will show “REPEAT” as in Figure 1. B.
2. The LCD will be shown FM or AM with playing stations code. 3. Automatic search; Long press CD play/pause button ( ) to start scan and save the program, it could save up to P01-P20 programs. press button (PROG) to find already stored program and press ( ) or ( ) to play the stored program as desired. 4. Manual search: Long press ( ) or ( ) to select the program as desired, and it will auto stop by last program. 5.
USB Operation 1. Press function button to USB mode, and put USB dock to USB port. 2. Several second after USB dock is inserted, it will automatically play the first song, the playing time and program will be shown alternately. 3. Press pause button ( ) to pause the music, and playing time will be flash on the display, press Pause ( ) again to continue playing 4. Press stop button ( ) to stop playing, and total programs will be shown on display. 5.
Specifications Power AC: ~110V/60Hz 10W DC: 9V(UM-2*6pcs) Output power: RMS 1.2 W x2 CD playback frequency: 31.5Hz-16kHz±3dB CD signal/noise ratio: ≥40dB CD sampling frequency: 44.1kHz Frequency range: FM: 87.5-108MHz AM: 520-1710kHz Speaker impedance: 8Ω+8Ω Dimensions: 214.5(L)*215.5(W)*121.5(H)mm Weight: about1.44kg The device is not suitable for professional use. In case of professional use, all warranty obligations of the manufacture will be voided. Power Supply 1.
Troubleshooting Guide Symptom No working CD player will not play No sound from device Intermittent sound from CD player Possible cause -Power cable not in AC jack correctly -CD is not loaded properly -CD may not be compatible with the player -CD door is not put in right way -Operate the wrong way -Volume at minimum Solution -Put the AC power cable in correctly way -Load CD with label side up -Use better quality blank media and re-test -Check the CD door is fully closed in right way -Check this manual on
SAFETY INSTRUCTIONS READ INSTRUCTIONS: Read all safety and operating instructions prior to use. RETAIN INSTRUCTIONS: The safety and operating instructions should be saved for future reference. FOLLOW INSTRUCTIONS: All operating and safety instructions should be followed. CLEANING: Unplug this product from the wall outlet before cleaning. Do not use liquid or aerosol cleaners. Use a dry cloth to clean. WATER AND MOISTURE: To avoid electrocution risk, do not use this product near water.
OVERLAD PROTECTION: This product is equipped with an overload protection. This is a safety feature. If replacement of plug is necessary, be sure that the service technician has used a replacement plug specified by the manufacturer. ADDED POWER PROTECTION: For added protection during a lighting storm or when product is left unused and unattended for some time, be sure to unplug product from wall outlet.
The product must be sent in the original packaging, or a reasonable substitute, to prevent damage. You must include your full name, shipping address, and telephone number for order reference. No return will ship back to a PO Box. REPAIR OR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS THE EXCLUSIVE REMEDY OF THE CONSUMER. BRIA SHALL NOT BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR BREACH OF ANY EXPRESS OR IMPLIED WARRANTY OF THIS PRODUCT .
