User's Manual

E-7
TAPE OPERATION
1. Open the cassette cover by pressing the STOP/EJECT BUTTON. Insert the cassette tape, bottom side
up with the tape facing you. Close the cover, now the unit is ready for operation.
2. Pause
Press the PAUSE BUTTON to stop the tape travel during recoding or playback, press the pause button a
second time the resume play or recording.
3. Automatic Stop (Auto Stop)
When the cassette tape that is being played or recorded on reaches the end of the tape, the
unit will power off
4. Fast Forwarding and Rewind
To fast forward or to rewind the tape, press the FFWD or REWIND BUTTON. Press the STOP/EJECT
BUTTON to stop the moving tape at the desired location.
5. Play Back
(1) Install a Cassette Tape
(2) Set the FUNCTION to TAPE.
(3) Press the PLAY BUTTON.
(4) Adjust the VOLUME CONTROL to desired sound level.
6. Recording
Install a cassette as described before.
Press the RECORD BUTTON.
To record from the Radio, convert the function button to the radio position.
To record from CD, convert the function button to CD.
BLUETOOTH OPERATION
Connect the auto devices under Bluetooth mode, after successfully connected, the unit will start to play
music, then press VOL-/VOL+ button to adjust volume, press SKIP+ button to move next or SKIP- button to
move previous, press PLAY/PAUSE button to play or pause the music.
Bluetooth device name: W-RCT410
SPECIFICATIONS
Frequency Range: AM 530 - 1710 KHz
FM 87.5 – 108 MHz
Power Sources: 120V~ 60Hz 12W or
8 x DC1.5V ‘C’ (UM-2) Batteries (Not included)