User's Manual
E-5
1. Handle 15. Tape pause
2. CD door 16. Tape stop/eject
3. Power button 17. Tape FWD skip
4. Play/Pause 18. Tape REV skip
5. Stop/Band/Pair 19. Tape play
6. Program 20. Record
7. Mode button 21. Tape door
8. Function 22. PHONE JACK
9. SKIP+ 23. AUX IN JACK
10. SKIP- 24. Speakers
11. VOL+ 25. AC Mains
12. VOL- 26. Battery door
13. LCD display
14. Power indicator
IMPORTANT NOTES
Avoid installing the unit in locations described below:
Places exposed to direct sunlight or close to heat radiating appliances such as electric heaters.
Dusty places.
Places subject to constant vibration.
Humid or moist places.
POWER SOURCES
The unit operates on 120V~ 60Hz or 8 x DC1.5V “C” (UM-2) batteries. Do not attempt to operate the radio
on any other power source. You could cause damage to the unit and void your warranty.
Please be sure the power outlet you plug the unit into is working and receives constant power.
AC OPERATION
1. When the AC power cord (included) is connected to the AC Power Socket on the back of the unit and the
other end is plugged into a AC 120V~ 60Hz wall outlet, the unit will disconnect the batteries automatically,
and operate on AC Power only.
2. Convert the FUNCTION button to “CD” or “RADIO” or “TAPE” or “AUX”
BATTERY OPERATION
1. Remove the BATTERY DOOR.
2. Install 8 x DC1.5V “C” (UM-2) batteries (not included) according to the polarity diagram inside the battery
compartment.
3. Close the BATTERY DOOR.
IMPORTANT: Be sure that the batteries are installed correctly.
Wrong polarity may damage the unit and void the warranty.
For best performance and longer operating time, we recommend the use of good quality
alkaline-type batteries.
CAUTION
1. Do not mix old and new batteries.
2. Do not mix alkaline, standard (carbon-zinc) or rechargeable (nickel-cadmium) batteries.
3. If the unit is not to be used for an extended period of time, remove the battery. Old or leaking battery can
cause damage to the unit and may void the warranty.
4. Do not dispose of batteries in fire, batteries may explode or leak.
BATTERY REPLACEMENT
When the output sound of this unit becomes distorted or the CD player operation appears unstable, the
batteries are weak. You need to replace all the exhausted batteries at the same time as soon as possible to
avoid battery leakage.