User's Manual

AUX MODE

Press power button to power on, ‘FM” is the default mode, then convert SOURCE button to AUX

mode, connect up the external audio, the unit will play music and you can press VOL- and VOL+

adjust to your desired volume

USB CHARGING

2 USB charging port, when 1 USB port used, the USB output is 5V/2A, when 2 USB port

used, the USB output is 5V/1A

Bluetooth

(bt) Mode

A Bluetooth enabled device must be paired with the radio before using them together for the

first time. After a device has been paired, the radio will automatically connect to it when

placed in Bluetooth (bt) mode.

1. Make sure Bluetooth® is enabled on your device. Enable it if it hasn’t.

2. Press MEN /



/PAIR until the display reads bt. The radio is now in Bluetooth mode.

3. Use your device to search for available Bluetooth devices (i.e., your radio). This function is

usually in the Bluetooth settings menu; refer to your device’s instruction manual to learn

4. The radio will announce itself as “ NRC-182 ” Select it from the list.

5. The radio will play an ascending tone to indicate that pairing was successful. Start

playback on your device