User's Manual

Customer Support: 1-888-999-4215
11
CD, FM Radio & Line In
Using the Audio Input
Requires a 3.5mm audio
cable (not included)
1. Connect a 3.5mm audio cable to the
Line In and the audio output on an
MP3 player or other audio device.
2. Press the Source button to
switch to Line In mode.
3. Use the native controls on
the connected MP3 player or
other audio source to play your
audio through the unit.
Loading a CD
1. Open the Disc Door by
pressing the Open button.
2. Place a CD into the unit,
label side facing up.
3. Close the Disc Door.
Playing a CD
1. Follow the instructions
for Loading a CD.
2. Press the Source button to
switch to CD mode.
3. Press the Play/Pause button to
begin playing the loaded CD.
Programming a CD
1. Follow the instructions for
Loading a CD and Playing a CD.
2. Press the Stop button to
stop the CD during play.
3. Press the Prog button on the remote.
4. Use the Skip/Search buttons to
enter the desired track number. Press
the Prog button to set the track.
5. Repeat step 3 until the desired number
of CD tracks are programmed.
6. Press the Play/Pause button
on the remote to begin playing
the programmed tracks.
Playing the Radio
1. Press the Source button to
switch to FM Radio mode.
2. Press the Tune+/- buttons to tune
the radio. Press and hold to search
for the next available station.
Radio Reception
Adjust the position of the antenna
to improve FM radio reception.
1. Follow the instructions for
Playing the Radio.
2. Press the Prog button on the remote.
3. Press the Tune+/- buttons on the
remote to select a preset number.
Up to 10 stations may be preset.
4. Press the Prog button to save the
current station to the selected preset.
Saving a Radio Station as a Preset
1. In FM Radio mode, press the Mem+
button to cycle through saved presets.
Tuning to a Saved Preset Station
IHB603-776-01-IB.indd 11 3/6/2013 2:04:00 PM