User Guide

After pairing, you can quickly connect by pressing
the
A/B button and HOME button directly to
turn on the device, as long as you have not paired
another device in the same mode.
Double-click the
MODE button to take pictures.
Double-click and then hold the
MODE button to
record the first 30 seconds of game screen.
Connect to Switch
1、Turn on Switch and click
"
Controllers - Change Grip/Order " in order.
2、Press and hold the
X/Y button first,
then press the
HOME button to turn it on.
The indicator flashes
red.
3、Press and hold the
P button for 3 seconds,
the indicator flashes
red and yellow alternately.
4、If connection succeeds, the indicator shines
red.
Xbox wireless controller
Turn off
Press HOME button 4 seconds to turn off the controller.
Press and hold the BACK button and MODE button
simultaneously for 2 seconds to reset
all functions of the controller.
Reset function
5V 1A chargers are applicable.
The indicator flashes during charging and
turns off or stays on when fully charged.
If there is no 5V 1A charger,
plug it into the USB port of your computer for charging.
Charging
Joystick light ring flashes red when the battery is below 20%.
Low battery
Product name：ZD-O RGB
Model：ZD-O23
Battery capacity：800 mAh
Operating current：＜150 mA
Compatibility protocols：Bluetooth 3.0/4.0/5.0 USB 2.0/3.0
Operating temperature：-10 ℃ ~ 60 ℃
Weight：≈206 g
Frequency range：2402 MHz ~ 2480 MHz
Transmitting power：＜1 dBm
FCC Warning Statement Changes or modifications not
expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.
This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to Part 15 of
the FCC Rules. These limits are designed to provide
reasonable protection against harmfulinterference in a
residential installation. This equipment generates uses
and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions,
may cause harmful interference to radio communications.
However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception,
which can be determined by turning the equipment off a
nd on, the user is encouraged to try to correct the
interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and
receiver.
-- Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician
for help.
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received,
including interference that may cause undesired operation.
The device has been evaluated to meet general
RF exposure requirement.
Specifications are subject to change without notice.
中国制造
MADE IN CHINA