Operating Instructions

Operating Instructions
MaxLite
®
LED Architectural Brushed Nickel Ceiling Fixture
© Copyright 2017. MaxLite, Inc. All Rights Reserved.
12 York Ave, West Caldwell, NJ 07006 Tel: [phone] Fax: [phone] Email: [e-mail]
Page: 5
REV: 10/12/17
* For Items: KLD3001LL / KLD3001LL-MSV / KLD3001LL-EM
1.) Before beginning assembly, installation or operation of
product, make sure all parts are present. Compare parts
with package contents list on previous page. If any part is
missing or damaged, do not attempt to assemble, install or
operate the product. Contact customer service for
replacement parts.
2.) Loosen 3 screws counter counterclockwise and remove
lens (figure 1).
3.) Install the mounting plate with screws to the junction box
(figure 2).
4.) Follow the Wiring diagram to contact wires from luminaires
to wires of Junction box(figure 3).
5.) Put the fixture plate across the screw of the lock in
figure 2, then rotate fixture plate clockwise and lock it
tightly with the screw lock (figure 4).
6.) Securely mount the lens to the fixture housing
(figure 5).
7.) Tighen 3 screw clockwise (figure 6).
8.) Restore power to the electrical box. Turn the light
switch on to activate the fixture.