Operating Instructions
Operating Instructions
MaxLite
®
LED Architectural Brushed Nickel Ceiling Fixture
© Copyright 2017. MaxLite, Inc. All Rights Reserved.
12 York Ave, West Caldwell, NJ 07006 Tel: 973-244-7300 Fax: 973-244-7333 Email: info@maxlite.com
Page: 2
REV: 10/12/17
•
Risk of Fire - Supply conductors (power wires) connecting the fixture must be rated minimum 90 .
If uncertain consult an electrician.
•
Risk of Fire/Electric Shock - If not qualified, do not attempt installation. Contact a qualified electrician.
CAUTION:
•
For your safety read and understand instructions completely before starting installation.
•
To prevent wiring damage or abrasion, do not expose wiring to edges of sheet metal or other sharp objects.
•
Before attempting installation, check your local electrical code, as it sets the wiring standards for your locality.
NOTES:
•
If luminaire (fixture) is to be switched from a wall switch, make sure black power supply wire is
connected to the switch. DO NOT connect the white supply wire to the switch.
•
Make certain no bare wires are exposed outside the wire nut connectors.
•
Do not make or alter any open holes in an enclosure of wiring or electrical components during kit installation.
•
Warranty is not applicable to lamps not installed in compliance with:
-
National Electrical Code (NEC)
-
The Standard for Safety of Underwriters Laboratories Inc. (UL)
Models:
ML2LASABNU169CSMSV
,
ML2LAMABNU209CSMSV,
ML2LALABNU249CSMSV,
ML2LASABNU169CSEMMSV,
ML2LAMABNU209CSEMMSV,
ML2LALABNU249CSEMMSV
ML2LASPWHU169CSMSV,ML2LAMPWHU209CSMSV,ML2LALPWHU249CSMS,ML2LASPWHU169CSEMMSV,ML2LAMP
WHU209CSEMMSV,
ML2LALPWHU249CSEMMSV
Input Rating: 120-277VAC 50/60Hz
Operating Temperature: -20C° to 40°C
Damp Location Rated
Package Contents:
1 - Round Flushmount Housing 3 - Wirenuts (in parts bag)
1 - Round Flushmount Diffuser (shipped as part of flushmount housing) 2 - 1 ½” Electrical Box Screws (in parts bag)
1 - Installation Manual
Any Changes expressly or modifications not approved by the party responsible for compliance could void the user's authority to
operatetheequipment.
Thisdevicecomplieswithpart15oftheFCCRules.Operationissubjecttothefollowingtwoconditions:(1)Thisdevicemaynotcause
harmfulinterference,and(2)
thisdevicemustacceptanyinterferencereceived,includinginterferencethatmaycause
undesiredoperation.
Note: This equipment has been tested and found tocomply with the limits for aClass Bdigital device,pursuant to part15 of the FCC
Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with the instructions,
maycauseharmfulinterferencetoradiocommunications.However,thereisnoguaranteethatinterferencewillnotoccurinaparticular
installation.Ifthisequipmentdoescauseharmfulinterferencetoradioortelevisionreception,whichcanbedeterminedbyturningthe
equipmentoffandon,theuserisencouragedtotrytocorrecttheinterferencebyoneormoreofthefollowingmeasures:
—Reorientorrelocatethereceivingantenna.
—Increasetheseparationbetweentheequipmentandreceiver.
—Connecttheequipmentintoanoutletonacircuitdifferentfromthattowhichthereceiveris
connected.
—Consultthedealeroranexperiencedradio/TVtechnicianforhelp.
FCCRadiationExposureStatement:
ThisequipmentcomplieswithFCCradiationexposurelimitssetforthforanuncontrolledenvironment.
Thistransmittermustnotbeco‐locatedoroperatinginconjunctionwithanyotherantennaortransmitter.