Operating Instructions

ManualsBrandsDong Guan Bright Yin Huey Lighting ManualsElectrical EquipmentLED Ceiling light

MaxLite

LED Architectural Brushed Nickel Ceiling Fixture

12 York Ave, West Caldwell, NJ 07006 Tel: 973-244-7300 Fax: 973-244-7333 Email: info@maxlite.com

Page: 1

REV: 10/12/17

General Safety Information

•

To reduce the risk of death, personal injury or property damage from fire, electric

shock, falling parts, cuts/abrasions, and other hazards read all warnings and

instructions included with and on the fixture box and all fixture labels.

•

Before installing, servicing, or performing routine maintenance upon

this equipment, follow these general precautions.

•

Commercial installation, service and maintenance of luminaires

should be performed by a qualified licensed electrician.

•

For Residential installation: If you are unsure about the installation or

maintenance of the luminaires, consult a qualified licensed

electrician and check your local electrical code.

•

DO NOT INSTALL DAMAGED PRODUCT!

•

This fixture is intended to be connected to a properly installed and

grounded UL listed junction box.

WARNING:

Picture is for illustration purposes

only. Your model may vary.

Summary of content (7 pages)

PAGE 1
Operating Instructions MaxLite® LED Architectural Brushed Nickel Ceiling Fixture General Safety Information • To reduce the risk of death, personal injury or property damage from fire, electric shock, falling parts, cuts/abrasions, and other hazards read all warnings and instructions included with and on the fixture box and all fixture labels. • Before installing, servicing, or performing routine maintenance upon this equipment, follow these general precautions.
PAGE 2
Operating Instructions MaxLite® LED Architectural Brushed Nickel Ceiling Fixture • Risk of Fire - Supply conductors (power wires) connecting the fixture must be rated minimum 90 . If uncertain consult an electrician. • Risk of Fire/Electric Shock - If not qualified, do not attempt installation. Contact a qualified electrician. CAUTION: • For your safety read and understand instructions completely before starting installation.
PAGE 3
Operating Instructions MaxLite® LED Architectural Brushed Nickel Ceiling Fixture General Wiring Diagram CAUTION: Turn off electrical power at fuse or circuit breaker box before wiring fixture to the power supply. Luminaires © Copyright 2017. MaxLite, Inc. All Rights Reserved. 12 York Ave, West Caldwell, NJ 07006 Tel: 973-244-7300 Fax: 973-244-7333 Email: info@maxlite.
PAGE 4
Operating Instructions MaxLite® LED Architectural Brushed Nickel Ceiling Fixture Installation Instructions WARNING: RISK OF ELECTRICAL SHOCK • Turn off electrical power at fuse or circuit breaker box before wiring fixture to the power supply. • Turn off the power when you perform any maintenance. • Verify that supply voltage is correct by comparing it with the luminaire label information.
PAGE 5
Operating Instructions MaxLite® LED Architectural Brushed Nickel Ceiling Fixture * For Items: KLD3001LL / KLD3001LL-MSV / KLD3001LL-EM 1.) Before beginning assembly, installation or operation of product, make sure all parts are present. Compare parts with package contents list on previous page. If any part is missing or damaged, do not attempt to assemble, install or operate the product. Contact customer service for replacement parts. 5.
PAGE 6
Operating Instructions MaxLite® LED Architectural Brushed Nickel Ceiling Fixture Installation Instructions WARNING: RISK OF ELECTRICAL SHOCK • Turn off electrical power at fuse or circuit breaker box before wiring fixture to the power supply. • Turn off the power when you perform any maintenance. • Verify that supply voltage is correct by comparing it with the luminaire label information.
PAGE 7
Operating Instructions MaxLite® LED Architectural Brushed Nickel Ceiling Fixture Warranty Information MaxLite Inc. warrants its products for a minimum period of FIVE (5) years from the date of original purchase from MaxLite or its authorized distributor/dealer (the “Warranty Period”), as follows: If a Product fails to operate during the Warranty Period as a result of defects in materials or workmanship, MaxLite will, at its option, repair it, replace it with the same or like Product.