Specifications

Bin Vent, Models TBV-2, TBV-4, and TBV-6
9
Standard Equipment
Ship Loose Items
Items shipped loose with the TBV may include:
• Blower/Motor Pack*
• FilterCartridges*
• Magnehelic/PhotohelicGauge
• SolidStateTimerControlBox
• PlenumSilencer
• DamperAssembly
*In general, Torit Bin Vents are shipped without
the blower/motor packs installed (shipped loose) to
better protect the equipment during transit. Filter
cartridges are shipped installed in the TBV plenum
models. In the TBV insertable models, the filter
cartridges are shipped loose to avoid crushing the
portion of the filters that extend below the bottom
of the cabinet.
Pre-Installation
The TBV is not designed as a “stand alone” unit.
Rather, it is designed to be a filtration/ventilation
component of a larger system, such as a silo or
bin container. The open bottom of the bin vent is
intended for roof mounting applications. Some
preparation work is required before installing the
unit. A hole must be cut into the silo or storage bin
to the correct dimensions.
Ensure the silo or storage bin is
reinforced to properly support
the weight of the TBV. Failure to do so
may result in a collapse causing personal
injury/and or property damage.
See the Specification Control Drawing for footprint
dimensions and weights.