Steam Generator Iron Model: DSG33 Instruction Manual Please Retain For Reference
IMPORTANT SAFEGUARDS Make sure to read all the safety precautions below and look at the illustrations before you start using the appliance. 1. Read all instructions carefully before using. 2. Use the appliance for its intended use only. 3. The appliance is intended for household use only. 4. To protect against the risk of electric shock, do not immerse the iron and main base into water or any other liquids. 5.
14. Burns can occur from touching hot metal parts, hot water or steam. Use caution when using the appliance. If the iron is placed onto the iron rest plate during use, the iron rest plate may become a hot surface. Do not touch the iron rest plate and the sole-plate until they have cooled down completely. 15. Never use the iron facing towards the people because the steam can cause burns. 16. Never wind the supply hose during use. 17.
PARTS AND FEATURES 1 2 3 4 5 6 7 8 9 Steam button assembly (Steam button, lock button) Steam trigger Temperature control dial Power cord/supply hose Power Cord Power switch Steam rate selector Steam delivery light 12 Water tank 14 13 15 10 Iron rest 11 Soleplate 12 Heating indicator light 13 Steam button 14 Steam lock 15 Filter 16 Water tank Lock 16 1 2 4 3 11 10 9 5 6 8 7
FABRIC SETTING CHART Temperature Setting Fabric Ironing Instructions Steam selection Setting (Low) Synthetics, silk, Nylon, Arcylic, Acetate Dry Iron on the opposite side of the fabric Off (Medium) (MAX) / Wool, Polyester Rayon Cotton, Linen Use a press cloth and Steam iron on the opposite side of the fabric Iron while fabric is still damp MIN MIN ~ Ironing Temperature Setting Guide 1. Follow up the ironing instructions on the garment label.
. If you do not know what kind of fabric the article is made of, iron a piece of the material which is not visible when you wear to find out the appropriate temperature for your articles. 7. Pure woollen fabrics (100% wool) should be ironed with the iron setting to steam ironing position. It is advisable to set the temperature control button to “Max” position and use a dry pressing cloth. 8. When steam ironing woollen fabrics, shiny patches may occur.
Fill Water Tank 1. Press upwards the release button at the water tank and slide the detachable water tank outwards from the base. (See Fig.1) 2. Fill the water tank up to or below the “MAX” fill line with the clean tap water. (See Fig.2)(You can take filter out of the opening for filling water into water tank, (See Fig.3) or fill water into water tank directly with the filter existing in the opening.When empty the water tank will take 1 litre of water. 3.
during use, set temperature control dial at higher temperature position or steam adjustable knob to lower position. When temperature control dial set at “ ”, do not use steam ironing, otherwise, water leakage will happen from soleplate. Steam ironing cannot be activated until heating indicator light turns off. Steam ironing 1. Fill the water tank with clean tap water refer to above filling instructions. (Note: For every first use of the filter, please immerse it in water for better performance) 2.
7. Take water tank out of the base unit and pour out remaining water from water tank. NOTES: a. For every first time use, it is normal that a slight vibration sound may be heard from electrical pump inside the base unit for a few seconds when steam ironing is started. It is because the water is being pumped into the heating chamber. If this happens for more than 30 seconds, please check whether water tank and filter assembled correctly or not. b.
Vertical steam ironing Follow the steam ironing process, and then hold the iron in vertical position between 5cm and 15cm away from the hanging fabrics. Press down steam switch, this will create vertical steam. This feature is especially used for removing creases from hanging clothes and curtains. Never directly perform steam ironing on people. (See Fig.6) NOTE: During vertical steam ironing, hold the iron in a less than 90°angle from vertical position.
has been used up. Pump will be hot, and when temperature of pump being heated up exceeds its’ Max limit, overheat protection will automatically activate to protect pump being damaged. At this moment, steam delivery indicator light will turn off, please turn power switch on base unit off at first ,and then check if water tank has sufficient water or water tank has been well assembled. If not, please refill water tank and re-assemble water tank well into base unit. 30 minutes later, it will re-work again.
2. Filter should be replaced with a new one after about 2 months’ use.(base: 1. 0L / times x 2 times / week) Working life of filter depends on local water you used. If working life exceed its Max limit, the appliance can be used continuously, but limescale will be built up in steam chamber. So you should replace the filter as soon as possible or mix your tap water with distilled water at a proportion of 50%,if your local water is hard . Emptying and storing 1.
Trouble Shooting Guide Problems Iron won’t heat Possible causes Solution The appliance has not been plugged into power supply Connect the appliance to power supply. The temperature control button is set at “Min” position. Select the required ironing temperature as indicated in the temperature guide table.
After Sales Service. Warranty: This product is warranted to the original user for 12 months from date of purchase free from manufacturing defect at time of purchase. The product is intended for domestic use. Please keep your receipt or other evidence of purchase showing date of purchase, as this must be produced in the event of a claim.
After Sales Service. Warranty: This product is warranted to the original user for 12 months from date of purchase free from manufacturing defect at time of purchase. The product is intended for domestic use. Please keep your receipt or other evidence of purchase showing date of purchase, as this must be produced in the event of a claim.
