manual

DO-324A

- Move the unit over to a place where you can easily drain the water.

- Remove the drain plug at the bottom of your unit and drain the water.

- After fully draining the water tank, place the drain plug back on the drain

opening.

- Restart the unit, make sure the error code P1 is no longer displayed. When

the code doesn’t disappear, try turning off and on the unit a few times. When

the error code continues, please contact the after sales service.

NOTE : always make sure to install the drain plug, before turning the unit back

on.

CLEANING AND MAINTENANCE

Important :

- Always remove the plug from the socket before

cleaning the unit.

- Never use any chemical or abrasive products to

clean the unit.

- Never clean the unit with water or any other liquid,

this can cause electrocution.

- When the power cord is damaged it must be re-

paired or replaced by the after sales surface of the

manufacturer or by a qualied person.

1. Air lter

- Clean the air lter at least ever 2 weeks. To make

sure the airco can operate in optimal conditions.

- This appliance has 2 lters. Remove both lters by follow the arrows on the

back of the unit.

- Clean the air lters in lukewarm water with a bit of detergent. Rinse the l-

ters thoroughly and let them dry.

- Make sure the lters are completely dry before placing the back in to the

airco.

NOTE : the grill and lter are attached to one another, but can be taken apart.

2. Airco body

Use a damp, soft cloth and a bit of mild detergent, to clean the outside of the

unit. Make sure the unit is thoroughly dried afterwards.

3. Storing

Before storing the unit for a longer periode of time, please follow the next

steps :

- Drain all the water from the appliance.

- Afterwards turn on the unit in the “fan” mode for half a day. Make sure the

unit is placed in a heated room. This will dry the unit completely and previent