Operation Manual

DO2924
65
www.domo-elektro.be
High 100% Quick cooking: heating up, boiling
water, vegetables,...
2. Set the desired time with the parameter knob.
3. Press “Start/+30s/conrm” to start cooking.
4. During cooking, you can open the microwave door at all times. The microwave
will automatically pause the cooking. To resume, close the door and press
“Start/+30s/conrm”
5. When time has expired, you will hear an endsignal.
Reheat
1. Turn the function knob to
This microwave oven uses modern electronic control to adjust cooking parameters
to meet your needs better for cooking.
OPERATION INSTRUCTION
When the microwave oven is electrified,the oven will display "0:00", buzzer will ring once.
Then the unit enters waiting states.
2) Turn parameter knob to adjust the hour figures, the input time should be within 0--23.
3) Press " Start/+30s/Confirm" to confirm, the minute figures will flash.
5) Press " " to finish clock setting. ":" will flash.
Note: 1) If the clock is not set, it would not function when powered.
2) During the process of clock setting, if you do not press "
to confirm in 1 minutes, the oven will go back to the previous status automatically.
1) Turn function knob to " ", the hour figures flash.
4) Turn parameter knob to adjust the minute figures, the input time should be within 0--59.
There are two knobs on the panel. For better operations, the manual call the left knob
for function
Clock Setting
-
+
M.Low
Med.
M.High
High
parameter knob. Call the right knob for knob.
Knob Instructions
Start/+30s/Confirm
"
Start/+30s/Confirm
1.
13
. The display shows “200”.
2. Turn the parameter knob to the desired weight: 200, 400 or 600 g.
3. Press “Start/+30s/conrm” to conrm.
Defrost by weight
1. Turn the function knob to
This microwave oven uses modern electronic control to adjust cooking parameters
to meet your needs better for cooking.
OPERATION INSTRUCTION
When the microwave oven is electrified,the oven will display "0:00", buzzer will ring once.
Then the unit enters waiting states.
2) Turn parameter knob to adjust the hour figures, the input time should be within 0--23.
3) Press " Start/+30s/Confirm" to confirm, the minute figures will flash.
5) Press " " to finish clock setting. ":" will flash.
Note: 1) If the clock is not set, it would not function when powered.
2) During the process of clock setting, if you do not press "
to confirm in 1 minutes, the oven will go back to the previous status automatically.
1) Turn function knob to " ", the hour figures flash.
4) Turn parameter knob to adjust the minute figures, the input time should be within 0--59.
There are two knobs on the panel. For better operations, the manual call the left knob
for function
Clock Setting
-
+
M.Low
Med.
M.High
High
parameter knob. Call the right knob for knob.
Knob Instructions
Start/+30s/Confirm
"
Start/+30s/Confirm
1.
13
. The display shows “dEF1”.
2. Turn the parameter knob to the desired weight: between 100 and 2000 g.
3. Press “Start/+30s/conrm” to conrm.
Desfrost by time
1. Turn the function knob to
This microwave oven uses modern electronic control to adjust cooking parameters
to meet your needs better for cooking.
OPERATION INSTRUCTION
When the microwave oven is electrified,the oven will display "0:00", buzzer will ring once.
Then the unit enters waiting states.
2) Turn parameter knob to adjust the hour figures, the input time should be within 0--23.
3) Press " Start/+30s/Confirm" to confirm, the minute figures will flash.
5) Press " " to finish clock setting. ":" will flash.
Note: 1) If the clock is not set, it would not function when powered.
2) During the process of clock setting, if you do not press "
to confirm in 1 minutes, the oven will go back to the previous status automatically.
1) Turn function knob to " ", the hour figures flash.
4) Turn parameter knob to adjust the minute figures, the input time should be within 0--59.
There are two knobs on the panel. For better operations, the manual call the left knob
for function
Clock Setting
-
+
M.Low
Med.
M.High
High
parameter knob. Call the right knob for knob.
Knob Instructions
Start/+30s/Confirm
"
Start/+30s/Confirm
1.
13
. The display shows “dEF2”.
2. Turn the parameter knob to the desired time, between 0:05 and 95:00.
3. Press “Start/+30s/conrm” to conrm.
Auto menu
1. Turn the function knob to
This microwave oven uses modern electronic control to adjust cooking parameters
to meet your needs better for cooking.
OPERATION INSTRUCTION
When the microwave oven is electrified,the oven will display "0:00", buzzer will ring once.
Then the unit enters waiting states.
2) Turn parameter knob to adjust the hour figures, the input time should be within 0--23.
3) Press " Start/+30s/Confirm" to confirm, the minute figures will flash.
5) Press " " to finish clock setting. ":" will flash.
Note: 1) If the clock is not set, it would not function when powered.
2) During the process of clock setting, if you do not press "
to confirm in 1 minutes, the oven will go back to the previous status automatically.
1) Turn function knob to " ", the hour figures flash.
4) Turn parameter knob to adjust the minute figures, the input time should be within 0--59.
There are two knobs on the panel. For better operations, the manual call the left knob
for function
Clock Setting
-
+
M.Low
Med.
M.High
High
parameter knob. Call the right knob for knob.
Knob Instructions
Start/+30s/Confirm
"
Start/+30s/Confirm
1.
13
.
2. You can select one of the 10 pre-set functions (A1-A10) with the parameter knob.
For more information, see the table below.
3. Press “Start/+30s/conrm” to conrm.
4. Turn the parameter knob to set the weight (g).
5. Press “Start/+30s/conrm” to start
Menu Weight (g) Display
Pizza
(A-1)
200 g 200
400 g 400
Meat
(A-2)
250 g 250
350 g 350
450 g 450