Operation Manual

DO2924
64
CONTROL PANEL AND USE
1. Function knob
2. Parameter knob
Setting the clock
1. Turn the function knob to
This microwave oven uses modern electronic control to adjust cooking parameters
to meet your needs better for cooking.
OPERATION INSTRUCTION
When the microwave oven is electrified,the oven will display "0:00", buzzer will ring once.
Then the unit enters waiting states.
2) Turn parameter knob to adjust the hour figures, the input time should be within 0--23.
3) Press " Start/+30s/Confirm" to confirm, the minute figures will flash.
5) Press " " to finish clock setting. ":" will flash.
Note: 1) If the clock is not set, it would not function when powered.
2) During the process of clock setting, if you do not press "
to confirm in 1 minutes, the oven will go back to the previous status automatically.
1) Turn function knob to " ", the hour figures flash.
4) Turn parameter knob to adjust the minute figures, the input time should be within 0--59.
There are two knobs on the panel. For better operations, the manual call the left knob
for function
Clock Setting
-
+
M.Low
Med.
M.High
High
parameter knob. Call the right knob for knob.
Knob Instructions
Start/+30s/Confirm
"
Start/+30s/Confirm
1.
13
. The hour indicator on the display
ashes.
2. Turn the parameter knobto the correct hour, between 0 and 23.
3. Press “Start/+30s/conrm” to conrifm. The minute indicator on
the display ashes.
4. Turn the paramater knob to adjust the minutes, between 0 and
59.
5. Press “Start/+30s/conrm” to conrm.
Setting the timer
1. Turn the function knob to
This microwave oven uses modern electronic control to adjust cooking parameters
to meet your needs better for cooking.
OPERATION INSTRUCTION
When the microwave oven is electrified,the oven will display "0:00", buzzer will ring once.
Then the unit enters waiting states.
2) Turn parameter knob to adjust the hour figures, the input time should be within 0--23.
3) Press " Start/+30s/Confirm" to confirm, the minute figures will flash.
5) Press " " to finish clock setting. ":" will flash.
Note: 1) If the clock is not set, it would not function when powered.
2) During the process of clock setting, if you do not press "
to confirm in 1 minutes, the oven will go back to the previous status automatically.
1) Turn function knob to " ", the hour figures flash.
4) Turn parameter knob to adjust the minute figures, the input time should be within 0--59.
There are two knobs on the panel. For better operations, the manual call the left knob
for function
Clock Setting
-
+
M.Low
Med.
M.High
High
parameter knob. Call the right knob for knob.
Knob Instructions
Start/+30s/Confirm
"
Start/+30s/Confirm
1.
13
. The display shows “00:00”.
2. Turn the parameter knob to the desired time, maximum 95 min.
3. Press “Start/+30s/conrm” to conr
4. When the timer is ended, you wil hear a signal 5 times.
Microwave
Quick cooking
1. Press “Start/+30s/conrm”
2. The cooking will start automatically at full power for 30 sec. Repeatedly pressing
the button will increase cooking each time by 30 sec. up to a maximum of 95 min.
Standard use
1. Place the food on the glass turntable and close the door. Always make sure the
food is in a microwave-safe container. Set the desired power with the function
knob.
You can consult the table below as a guideline for settings:
Power Output Application
Low 10% Keep warm, softening ice cream
M. Low 30% Drinks or soup
Med. 50% Slow cooking: stew, sh,...
M. High 80% Normal cooking: rice, sh, chicken, meat
microwave
menu
time defrost
weight defrost
高火指示: 高火标志。当微波火力为P100/P80的时候，高火标志点亮(外销 阳振敏）
clock：可设置调节至当前时间，当时钟用。
Kitchen Timer：倒计时时间设置，提醒功能，程序不启动。(外销 阳振敏）
针对这款机型屏幕整理的图标解释
（红色图标，非标）：
Pre-set：倒计时时间设置，程序启动。(外销 阳振敏）
weight
grill
grill.combi
产品型号：AM823AY9-S00E
项目经理：
设 计 者：彭玲
工业设计：
材 质：PC
物料编码：
零件名称：控制贴片
对应电路：
设计时间：2016-03-25
变更记录： 无
备 注：新项目
Stop/Clear Start/+30s/Confirm
Low
M.Low
Med
High
M.High
背印白色
背印黑色
1
2