Operation Manual

DO230SR

burns.

Step 4

Let the steam cleaner cool down for 15 minutes before ﬁ lling it again.

Step 5

Fill the water tank by using the funnel.

Step 6

Place the safety ﬁ ll cap bag on the unit by turning it clockwise.

Step 7

Place the plug in the socket.

Using the ﬂ oor brush

Step 1

Place the extension tubes on the handle of the ﬂ exible tube. To connect the

extension tubes to the handle or to each other press the button so it ﬁ ts into the hole.

To disconnect, press the button again and pull the two parts apart.

NOTE

: Connect the ﬂ oor brush to the tubes by using the angle adaptor.

Step 2

When the angle adapter isn’t attached to the ﬂ oor brush, keep the brush with

the bristles up in your left hand. Turn the angle adaptor downward and place it in the

opening at the back of the ﬂ oor brush. Now turn the angle adaptor 180°.

Step 3

Place the plug in the socket. To heat up cold water will take about 8-10

minutes. When using hot water the heat up time will shorten. Attach a cloth to the

ﬂ oor brush. You should use a white terry cloth to absorb dirt and to protect delicate

surfaces. This can also be used to clean vertical surfaces.

IMPORTANT

: when the cloth is too thin, the bristles may break through the cloth.

When you don’t have a thick cloth available use two cloths.

ATTACHING THE ACCESSORIES TO THE FLEXIBLE TUBE

Squeegee

Very useful for cleaning large windows, plastic material, ceramics, tiles or marble

surfaces. How to use? Place the squeegee on the handle or use the extension tubes for

hard to reach places. Steam abundantly, clean with a soft spong and remove excess

water and dirt with the squeegee.

ATTENTION

: prevent sudden temperature changes when cleaning the windows to

prevent glass breaking.

Concentrator

Very efﬁ cient for cleaning hard to reach places. Ideal for radiators, doorposts, roll-

down shutters or sanitary ﬁ xtures. The concentrator ﬁ ts directly on the handle and can

also be used with the extension tubes.

Detail brushes

Place the detail brushes on the concentrator, which can be connected directly on the