Hardware Guide

SOL8SDR Hardware Guide
Commercial in Confidence
Revision 8.0
The information contained in this document is the property of Domo Tactical Communications (DTC) Ltd.
Any copying or reproduction in any form whatsoever is prohibited without the written permission of DTC.
© 2016 Copyright Domo Tactical Communications (DTC) Limited. All rights reserved.
Page 4-26
4.5 Installing the Domo Device Controller
Note: Domo Device Controller will only connect to a device which is configured as a Transmitter. If
configured as a Receiver or Mesh, use the web browser.
4.5.1 Install the Domo Device Controller on your PC
Double-click the DomoDeviceController-Installer.exe on your USB stick.
The Domo Device Controller Setup window opens.
Browse to the location where you wish to install the software (or leave at default).
Click the Install button.
On successful completion, close the installer. A desktop icon will have been created.