Hardware Guide

SOL8SDR Hardware Guide
Commercial in Confidence
Revision 8.0
The information contained in this document is the property of Domo Tactical Communications (DTC) Ltd.
Any copying or reproduction in any form whatsoever is prohibited without the written permission of DTC.
© 2016 Copyright Domo Tactical Communications (DTC) Limited. All rights reserved.
Page 5-36
5.2 SOL8SDR2x2W-P-HSK – Heatsink Accessory
5.2.1 Parts List
Item
Description
AP008895 x 4
M6x12 socket cap screw black
MW3376
SOL8SRD2X2-P heatsink
5.2.2 Assembly
Figure 5-1 Heatsink Accessory Assembly
Orientate the heatsink as in Figure 5-1 and lay the heatsink on the top face of the SOL8SDR2X2W-P,
indicated by the thermal path symbol. Carefully align the screw holes.
Using the 4 x M6x12 socket cap screws, assemble the heatsink to the SOL8SDR2X2W-P. The screws
should be tightened to a torque of 8Nm.