User`s manual

D10
30
Info Menu
Press the Menu button to open the OSD menu. Press the cursor ◄ ► button to move to the Info
menu. Press the cursor ▲▼ button to move up and down in the Info menu.
iteM deScriptiOn default
Model name Displays the model name of the device (D10)
These
items are
display
only.
Unit S/N Displays the serial number of the device.
Software
version
Displays information about the software version.
Active source Displays the active source.
Pixel clock Displays information about the sampling rate.
Signal format Displays information about the type of signal format.
H/V refresh
rate
Displays the refresh horizontal and vertical refresh rates.
Sync type Displays information about the sync type signal.
Lamp hours
Shows the number of hours lamp has been in use for Eco and
Normal modes.
Lamp hour
Reset
After replacing the lamp, this item should be reset. Refer to “Re-
placing the Projection Lamp” on page 31.
Test pattern
Displays information about the type of test pattern (Range: None,
Black Screen, White Screen, Vertical Ramp, Horizontal Ramp,
Grid, Horizontal Lines, Vertical Lines, Diagonal Lines, Logo Dis-
play).
None
Downloaded From projector-manual.com Sim2 Manuals