d mi Extendable Aluminum Square Dinning Table outdoor living ASSEMBLY MANUAL
35.4" 35 .4 29. 5" " 1 7.7 " 32 .7 " 25 .6" 35 .4 " 3 5 .4 " / 7 0 .8 " 29. 5" 3 0 .
Leg Table Nut Foot pad Fixing pole Fixed pad Screw Flat washer Hex key Split lock washer Socket wrench Step 1: Firstly, attach the #F, #E and #D as the picture shows, then insert the #C into A, and tighten the #F by #K to fix the #C. Step 2: As shown on the right, cover the #C with #B, then attach #D, #E and #F, and tighten #F with #K to completely fix the legs.
NOTE: #H is used to increase the stability when the table is fully extended, you could decide whether assemble it or not according to your needs. Step 3: Hammer #G into #B to complete the leg assembly. (Hammer is not included) Step 4: Fixing the #H onto #B with the screws (#I) included.
How to use the Extendable Table? Step 1: #L is used to prevent table from waggling and being damaged during transit, please DO remove it when open the table. Step 2: Pull out the upper table to the right side. Step 3: Pull out the lower table to the upper left side. Step 4: Make the lower table to the same height as the upper one, and then secure the two tables with the latch under the tabletop.
How to retract the Extendable Table? Step 1: Unlock the latch under the tabletop, then pull out the lower tabletop. Step 3: Push the upper tabletop back to the center of the table. Step 2: As shown in the picture, make the lower table back to its original position.
