User manual

Warning! Never lift the machine by
gripping it’s control panel, door, or
detergent dispenser.
Unpacking
When supplied the washing machine is
packed using a number of locking devices/
packing pieces to prevent drum and motor
from damage in transit All transit bolts and
packing must be removed before using the
appliance.
You are advised to keep all transit devices
so that they can be refitted if the machine
ever has to be transported again.
1. Spread some of the polystyrene pack-
aging materials on the floor behind the
machine and then lay the machine care-
fully rear side down on them. Make sure
that no hoses are crushed in the proc-
ess. Remove the polystyrene base from
the bottom of the appliance.
2. Return machine to it's upright position
and remove the power supply cable and
the draining and inlet hose from the
hose holders on the rear of the appli-
ance.
3. With a suitable spanner unscrew and re-
move the three screws and their
spacers on machine's rear.
4. The three holes must then be plugged
with the plastic plug caps supplied in
the bag containing the instruction book-
let, which can be found inside the drum.
17