Installation Guide

EN
SKL101, SKS101 Preparing the installation
9
➤ Verify the smooth sliding of the slide out kitchen (fig. 6). Ensure that slider locks
are fully engaged when kitchen is extended and locking release tabs (fig. 6 1)
are releasing the slider locks correctly.
I
NOTE
•
Slider locks are working correctly if the kitchen does not slide back
into cavity when you give it a light push.
•
If the slider locks on one or both sides do not engage, fully extend
the kitchen. Pull it outwards until a click is heard when the slider locks
engage.
•
Ensure the correct disengaging of slider locks as follows:
– Check if the locking release tabs can be pushed down easily with
no resistance.
– Push back the kitchen into the cavity with a light push.
5x
1
6
SKL101-I-AUS.book Seite 9 Donnerstag, 18. Oktober 2018 10:50 10