Installation Guide

EN
SKL101, SKS101 Preparing the installation
11
➤ Connect the rigid pipe as shown (fig. 7 1, page 10).
➤ Connect the flexible hose as shown (fig. 7 2, page 10).
5.3 Connecting the water supply
I
fig. 8
➤ Install the tap (4) to the sink using a rubber seal either side.
➤ Attach the flexible water hose (3) to the tap.
➤ Connect an additional extension hose (2) to the flexible water hose using male
fittings (1).
5.4 Connecting to a 12 Vg power supply
For the electrical connection, wires are attached to the inner wall of the slide out
kitchen.
➤ Connect the cooktop igniter wires via a joiner or a plug to a 12 Vg power source.
NOTE
The water supply can be permanently connected.
1
2
3
4
8
SKL101-I-AUS.book Seite 11 Donnerstag, 18. Oktober 2018 10:50 10