Operation Manual

EN
Saneo B, Saneo C Maintenance
43
5.14 What to do in case of problems
Problem Possible cause Remedy
Toilet no longer
flushes.
Faulty fuse.
Cassette not inserted.
Cassette full.
No power.
Electronics defective.
Pump defective.
Solenoid valve
defective.
Filter of the solenoid
valve is dirty.
Replace the fuse (see chapter
“Replacing the fuse in the operating
unit” on page 38).
If there are repeated failures, check
the electrical connections!
Replace defective parts.
Cassette tank
leaks.
Seal worn. Replace the cassette seal (see chap-
ter “Replacing the cassette seal” on
page 33).
No level indication. The float in the
cassette tank is
hung up or jammed
by toilet paper.
Clean the float in the cassette.
Do not use a high-pressure
cleaner!
Cassette tank
cannot be pushed
in completely.
Slider can be
opened, even
though the
cassette has
been removed.
Lower slider flange has
come loose.
Press slider flange into the correct
position.
Cassette can not
be removed.
Slider is opened. Close the slider.
Cassette does not
lock in the cassette
compartment.
Cassette lock is
defective.
Replace the cassette lock.