Operation Manual

EN
Maintenance Saneo B, Saneo C
40
5.12 Removing and replacing the lid and seat
I
Proceed as follows (fig. q, page 41):
➤ Loosen the spacer (2) by prying it out of its position with a screwdriver.
➤ Use a screwdriver to carefully pry the lid (1) out of its mounting and
remove it.
➤ If necessary, remove the components of the Autoclose with the markings
“CW” and “CCW”.
➤ Lift the lid.
➤ Use both hands to grasp the lid above the hinges (3) and bend it slightly
toward the bowl to detach it.
➤ Lift the seat.
➤ Use both hands to grasp the seat above the hinges (3) and bend it slightly
toward the bowl to detach it.
NOTE
The manufacturer accepts no liability for damage resulting from
incorrect or faulty installation.