Operation Manual

EN
Saneo B, Saneo C Using the toilet
27
➤ Hold the cassette tank on the handle (fig. h 2) with one hand while
holding the tank with the other hand on the housing (fig. h 3) so that you
can press the vent button (fig. h 1) while it is draining.
➤ Do not press the vent button until the draining neck is pointing
downwards!
✓ The tank drains steadily and without splashing.
➤ After draining, rinse out the cassette tank carefully.
➤ Then get the tank ready for use as described in chapter “Preparing the
cassette tank” on page 18 before inserting it into the toilet.
➤ Clear away course dirt from the wheels of the cassette tank to prevent
scratching of the cassette housing.
A
NOTICE!
Do not clean the inside of the cassette tank with a high-pressure
cleaner. This can damage the float for the level indicator.
1
2
3
h